Publishers

DST2020 BluePrint 6.5 CAM350 14.5 DST2020 BluePrint 6.5 CAM350 14.5





How to uninstall DST2020 BluePrint 6.5 CAM350 14.5 from your system

DST2020 BluePrint 6.5 CAM350 14.5 is a software application. This page is comprised of details on how to uninstall it from your computer. The Windows release was developed by DownStream Technologies, LLC. You can find out more on DownStream Technologies, LLC or check for application updates here. You can get more details on DST2020 BluePrint 6.5 CAM350 14.5 at . Usually the DST2020 BluePrint 6.5 CAM350 14.5 program is to be found in the C:\Program Files\DownStream Technologies\2020 directory, depending on the user's option during setup. You can remove DST2020 BluePrint 6.5 CAM350 14.5 by clicking on the Start menu of Windows and pasting the command line MsiExec.exe /I{8C2B134A-8B20-4085-A05C-3963F1EF6ADF}. Keep in mind that you might receive a notification for admin rights. BluePrint.exe is the programs's main file and it takes circa 23.52 MB (24662016 bytes) on disk.

The executables below are part of DST2020 BluePrint 6.5 CAM350 14.5. They occupy an average of 149.28 MB (156532277 bytes) on disk.

  • AccessDatabaseEngine_X64_2016.exe (79.00 MB)
  • BluePrint.exe (23.52 MB)
  • BPBasicIDE64.exe (24.00 KB)
  • CrashReport.exe (124.00 KB)
  • DocWzrd.exe (134.00 KB)
  • DownstreamRoboHelp.exe (258.50 KB)
  • gzip.exe (80.00 KB)
  • PackNRelLauncher.exe (10.50 KB)
  • PackNRelViewer.exe (8.44 MB)
  • tar.exe (163.00 KB)
  • unzip.exe (108.00 KB)
  • zip.exe (96.00 KB)
  • CAM350BasicIDE64.exe (28.00 KB)
  • cam350if.exe (1.64 MB)
  • camnt95.exe (15.35 MB)
  • CrashReport.exe (471.50 KB)
  • CRCCalculator.exe (47.00 KB)
  • DownstreamRoboHelp.exe (258.50 KB)
  • lmtools.exe (1.41 MB)
  • mrcagent.exe (264.00 KB)
  • quoteagent.exe (136.00 KB)
  • EnglishFontNameFromLocalFontName.exe (23.00 KB)
  • EnglishFontNameFromLocalFontName.exe (27.00 KB)
  • Sentinel System Driver Installer 7.5.8.exe (2.69 MB)
  • vc_redist.x64.exe (14.59 MB)
...click to view all...

The current page applies to DST2020 BluePrint 6.5 CAM350 14.5 version 6.5.000.1753 only. You can find below info on other versions of DST2020 BluePrint 6.5 CAM350 14.5:


If you are manually uninstalling DST2020 BluePrint 6.5 CAM350 14.5 we recommend you to verify if the following data is left behind on your PC.

Directories that were left behind:
  • C:\Program Files\DownStream Technologies\2020

Usually, the following files remain on disk:
  • C:\Program Files\DownStream Technologies\2020\AccessDatabaseEngine\AccessDatabaseEngine_X64_2016.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\20x24.pan
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\3DColorDialog.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\ActGeom.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\ActPE.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\allegro.ilinit
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\allegro.men
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\AMAPI.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\ansi_font
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Application-9749716f.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\BCGCBPro110.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CAM350 14.5 Release Notes.pdf
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\cam350.cpn
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\cam350.msg
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\cam350.nrl
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CAM350BasicIDE64.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\cam350if.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\cam350k.cpn
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CAMDDBEXT.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CamDLL.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\camnt95.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CommonDlgsDLL.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CrashReport.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CrashReport.ini
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\CRCCalculator.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\d3dcompiler_47.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\dbghelp.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\DFF.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\DownstreamRoboHelp.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\DstCMOExtract.txt
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\dstcxi.il
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\dstextract.txt
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\EHEngine.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\EULA.txt
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\exectvb1.scr
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\expat.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\ExtMemDLL64.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\flagfile.txt
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\FormatDXFForCAM350.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\FormatManagerForCAM350.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\GdiPlus.dll
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\gzip.exe
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Appendix\CAM350_Initialization_File.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Appendix\CAM350_Macros\CAM350_Macros.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Appendix\Command_Line_Switches.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Appendix\Gerber_Data_From_the_Beginning.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\blueback.gif
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\book_closed.gif
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\bookopen.gif
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\cam350 14.5 help.log
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\CAM350_Menu_Map.pdf
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\close.gif
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\content.gif
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Copyrights_and_Trademarks\Copyrights_and_Trademarks.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\cshdat_robohelp.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\cshdat_webhelp.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\directional.gif
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\ehlpdhtm.js
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_3D_PDF.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_Composite_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_DXF_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_GenCAD_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_Gerber_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_IPC-2581_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_NC_Drill_and_Mill_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_Netlist_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_ODB++_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Exporting_Data\Exporting_PADS_ASCII_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Add_a_Probe.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Add_a_Stiffener.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Add_a_Test_Point.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Adding_Alignment_Pins.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Assign_Net_End_Points.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Automated_Probe_Placement.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Automated_Test_Point_Generation.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Calculate_Probe_Drill_Size.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Change_Fixture_Origins.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Change_Fixture_Probe.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Change_Stiffener.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Checking_for_Violations.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Configuring_Bed_of_Nails_Fixtures.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Copy_Test_Points_to_Layer.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Delete_Test_Objects.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Exporting_Bed_of_Nails_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Exporting_Flying_Probe_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Find_Unprobed_Test_Points.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Generate_Fixture_Drills.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Generating_Test_Point_Reports.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Move_Probe.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Move_Test_Point.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Overview_of_Bed_of_Nails_Test_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Overview_of_Flying_Probe_Test_Data.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Reverse_Staggering_of_Test_Points.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Setting_Test_Object_Visibility.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Generating_PCB_Test_Data\Using_Query_TEST.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Getting_Help_with_CAM350\Technical_Support.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Getting_Help_with_CAM350\Using_CAM350_Help.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Getting_Started_with_CAM350\Bed_of_Nails_Tutorial.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Getting_Started_with_CAM350\CAM_Editor_Tutorial.htm
  • C:\Program Files\DownStream Technologies\2020\CAM350 14.5\Help\Getting_Started_with_CAM350\Common_Database.htm

Use regedit.exe to manually remove from the Windows Registry the data below:
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\A431B2C802B858040AC593361FFEA6FD
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{8C2B134A-8B20-4085-A05C-3963F1EF6ADF}

Additional values that you should remove:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\DownStream Technologies\2020\CAM350 14.5\camnt95.exe.ApplicationCompany
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\DownStream Technologies\2020\CAM350 14.5\camnt95.exe.FriendlyAppName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\A431B2C802B858040AC593361FFEA6FD\ProductName
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\DownStream Technologies\2020\
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{8C2B134A-8B20-4085-A05C-3963F1EF6ADF}\


A way to erase DST2020 BluePrint 6.5 CAM350 14.5 from your computer with the help of Advanced Uninstaller PRO

DST2020 BluePrint 6.5 CAM350 14.5 is an application released by DownStream Technologies, LLC. Sometimes, users try to erase this program. Sometimes this is difficult because doing this by hand requires some experience related to Windows internal functioning. The best EASY approach to erase DST2020 BluePrint 6.5 CAM350 14.5 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, add it. This is good because Advanced Uninstaller PRO is an efficient uninstaller and general utility to maximize the performance of your Windows system.

DOWNLOAD NOW

  • go to Download Link
  • download the setup by clicking on the green DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. Take some time to admire the program's design and number of tools available. Advanced Uninstaller PRO is a very useful package of utilities.

3. Press the General Tools button
Go to General Tools


4. Press the Uninstall Programs feature
Go to Uninstall Programs


5. A list of the programs existing on your computer will be made available to you

6. Scroll the list of programs until you find DST2020 BluePrint 6.5 CAM350 14.5 or simply click the Search field and type in "DST2020 BluePrint 6.5 CAM350 14.5". If it exists on your system the DST2020 BluePrint 6.5 CAM350 14.5 application will be found automatically. After you select DST2020 BluePrint 6.5 CAM350 14.5 in the list of apps, some information regarding the program is available to you:


  • Safety rating (in the lower left corner). This explains the opinion other users have regarding DST2020 BluePrint 6.5 CAM350 14.5, ranging from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Press the Read reviews button.
  • Details regarding the app you wish to remove, by clicking on the Properties button.
For example you can see that for DST2020 BluePrint 6.5 CAM350 14.5:





  • The software company is: http://www.downstreamtech.com
  • The uninstall string is: MsiExec.exe /I{8C2B134A-8B20-4085-A05C-3963F1EF6ADF}
7. Press the Uninstall button. A confirmation window will show up. Confirm the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will remove DST2020 BluePrint 6.5 CAM350 14.5.
Uninstall DST2020 BluePrint 6.5 CAM350 14.5


8. After removing DST2020 BluePrint 6.5 CAM350 14.5, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to proceed with the cleanup. All the items of DST2020 BluePrint 6.5 CAM350 14.5 that have been left behind will be detected and you will be able to delete them. By uninstalling DST2020 BluePrint 6.5 CAM350 14.5 with Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your system.

Your Windows system will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW


Disclaimer

The text above is not a recommendation to uninstall DST2020 BluePrint 6.5 CAM350 14.5 by DownStream Technologies, LLC from your computer, nor are we saying that DST2020 BluePrint 6.5 CAM350 14.5 by DownStream Technologies, LLC is not a good application. This text simply contains detailed info on how to uninstall DST2020 BluePrint 6.5 CAM350 14.5 in case you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.

2021-09-25 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2021-09-25 06:49:21.947