Publishers

FANUC Robotics Virtual Robot Controller V7.20 FANUC Robotics Virtual Robot Controller V7.20





A guide to uninstall FANUC Robotics Virtual Robot Controller V7.20 from your computer

You can find below details on how to remove FANUC Robotics Virtual Robot Controller V7.20 for Windows. It was created for Windows by FANUC Robotics America, Inc.. More information on FANUC Robotics America, Inc. can be seen here. FANUC Robotics Virtual Robot Controller V7.20 is usually set up in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC directory, but this location can differ a lot depending on the user's choice when installing the application. The full command line for uninstalling FANUC Robotics Virtual Robot Controller V7.20 is RunDll32. Keep in mind that if you will type this command in Start / Run Note you might get a notification for administrator rights. frcreatevirtualrobot.exe is the FANUC Robotics Virtual Robot Controller V7.20's main executable file and it takes circa 384.06 KB (393280 bytes) on disk.

FANUC Robotics Virtual Robot Controller V7.20 is comprised of the following executables which occupy 4.23 MB (4432326 bytes) on disk:

  • frcreatevirtualrobot.exe (384.06 KB)
  • frvirtual.exe (228.05 KB)
  • visctrls.exe (3.63 MB)


This web page is about FANUC Robotics Virtual Robot Controller V7.20 version 7.2032.34.05 only. You can find below a few links to other FANUC Robotics Virtual Robot Controller V7.20 versions:


When planning to uninstall FANUC Robotics Virtual Robot Controller V7.20 you should check if the following data is left behind on your PC.

You should delete the folders below after you uninstall FANUC Robotics Virtual Robot Controller V7.20:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

Files remaining:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AAIR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ABCASESP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ABTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ACST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ACTION.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ADPT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AFLO.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ALLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AMGRAUX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AMM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AMTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AOFS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APAMGR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APCNTRL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APSPOTSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APVT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ASBN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ATCELLIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ATCHGP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ATSRMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AVST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AWGEMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AWPSNN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AWRWMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\BGLG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\BINASC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CBACUL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CC2D.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CCGP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CCLV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CCVT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CDCALBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CETX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CFMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CHIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CHND.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CHUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPCONS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPIOSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPMSG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPPROD.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPSCAN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CJMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CMMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CNMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\COMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\COORDM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CPMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CPTPMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CRCRC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CSOP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CSXC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTCE.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTCP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTGL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTGV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTHP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTHS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTKCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTLD.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTLP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CZMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DAQLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DAQSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DAQTSKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DBMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DCSLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DELTAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DJOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DJOGTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DNCASESP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DNLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DNTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DOSFILE2.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DPCDICT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DRCAGNT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DUALARC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVFMDDEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVFORM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVHTTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVMEMDEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\EDMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ENCDR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ERLOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ERRSEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FCMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FNCELL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FRLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FRSOCK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FRSY.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\GDCONS.DLL

Use regedit.exe to manually remove from the Windows Registry the data below:
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{29DDB6F7-87D6-4DCE-A7D6-00CBD05C9A0D}


A way to remove FANUC Robotics Virtual Robot Controller V7.20 using Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V7.20 is a program marketed by the software company FANUC Robotics America, Inc.. Some people choose to remove this program. Sometimes this can be troublesome because removing this manually takes some experience regarding removing Windows applications by hand. The best EASY procedure to remove FANUC Robotics Virtual Robot Controller V7.20 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to optimize your computer.

DOWNLOAD NOW

  • navigate to Download Link
  • download the setup by pressing the DOWNLOAD button
  • set up Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire Advanced Uninstaller PRO's interface and number of features available. Advanced Uninstaller PRO is a very useful package of utilities.

3. Click on the General Tools button
Go to General Tools


4. Click on the Uninstall Programs feature
Go to Uninstall Programs


5. All the applications installed on your PC will appear

6. Navigate the list of applications until you locate FANUC Robotics Virtual Robot Controller V7.20 or simply activate the Search field and type in "FANUC Robotics Virtual Robot Controller V7.20". If it is installed on your PC the FANUC Robotics Virtual Robot Controller V7.20 program will be found automatically. When you select FANUC Robotics Virtual Robot Controller V7.20 in the list of apps, the following information regarding the program is available to you:


  • Star rating (in the left lower corner). This tells you the opinion other users have regarding FANUC Robotics Virtual Robot Controller V7.20, from "Highly recommended" to "Very dangerous".
  • Opinions by other users - Click on the Read reviews button.
  • Technical information regarding the application you want to uninstall, by pressing the Properties button.
7. Click the Uninstall button. A confirmation window will appear. Confirm the removal by pressing Uninstall. Advanced Uninstaller PRO will then uninstall FANUC Robotics Virtual Robot Controller V7.20.
Uninstall FANUC Robotics Virtual Robot Controller V7.20


8. After removing FANUC Robotics Virtual Robot Controller V7.20, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to perform the cleanup. All the items of FANUC Robotics Virtual Robot Controller V7.20 that have been left behind will be detected and you will be asked if you want to delete them. By removing FANUC Robotics Virtual Robot Controller V7.20 with Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your system.

Your system will remain clean, speedy and ready to serve you properly.

DOWNLOAD NOW


Disclaimer

This page is not a recommendation to remove FANUC Robotics Virtual Robot Controller V7.20 by FANUC Robotics America, Inc. from your PC, nor are we saying that FANUC Robotics Virtual Robot Controller V7.20 by FANUC Robotics America, Inc. is not a good application. This page only contains detailed instructions on how to remove FANUC Robotics Virtual Robot Controller V7.20 supposing you decide this is what you want to do. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.

2019-01-20 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2019-01-20 06:03:45.737