Publishers

FANUC Robotics Virtual Robot Controller V7.40 FANUC Robotics Virtual Robot Controller V7.40





A guide to uninstall FANUC Robotics Virtual Robot Controller V7.40 from your system

This page contains complete information on how to remove FANUC Robotics Virtual Robot Controller V7.40 for Windows. It is made by FANUC Robotics America, Inc.. More information on FANUC Robotics America, Inc. can be found here. FANUC Robotics Virtual Robot Controller V7.40 is normally set up in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC folder, however this location can vary a lot depending on the user's decision while installing the program. RunDll32 is the full command line if you want to remove FANUC Robotics Virtual Robot Controller V7.40. frcreatevirtualrobot.exe is the FANUC Robotics Virtual Robot Controller V7.40's main executable file and it takes approximately 392.06 KB (401472 bytes) on disk.

The executables below are part of FANUC Robotics Virtual Robot Controller V7.40. They take an average of 620.11 KB (634997 bytes) on disk.

  • frcreatevirtualrobot.exe (392.06 KB)
  • frvirtual.exe (228.05 KB)


The information on this page is only about version 7.40 of FANUC Robotics Virtual Robot Controller V7.40. You can find below info on other releases of FANUC Robotics Virtual Robot Controller V7.40:


Following the uninstall process, the application leaves leftovers on the computer. Some of these are listed below.

Folders found on disk after you uninstall FANUC Robotics Virtual Robot Controller V7.40 from your computer:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

The files below were left behind on your disk by FANUC Robotics Virtual Robot Controller V7.40's application uninstaller when you removed it:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AAIR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ACST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ADPT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AFLO.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ALLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMGRAUX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AOFS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAMGR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APCNTRL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APSPOTSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ASBN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCELLIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCHGP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AVST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\BINASC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CETX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CFMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHND.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CJMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CMMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CNMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COORDM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CRCRC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTHP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTKCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQTSKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DBMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DELTAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOGTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DNLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPCDICT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVFORM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVHTTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVMEMDEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ENCDR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERLOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERRSEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FCMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FNCELL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSOCK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSY.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GLOFILE.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCOM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HTTPD.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IACMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IADG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IAMSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IBMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOPLCTSK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOSCAN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSMON.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSTDIO.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LDCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK2.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LTGUIDE.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSAT2AS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSLSMN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSMN2AS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPALAS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPS2AS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSWBIAS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MAMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCTMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFFLTR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFPTHCHK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGMMGR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGT1.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MIINTR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MJOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ML.DLL

Use regedit.exe to manually remove from the Windows Registry the keys below:
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{FEBBCC8B-BA36-4554-839E-DE7151B513D7}


How to delete FANUC Robotics Virtual Robot Controller V7.40 using Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V7.40 is a program by FANUC Robotics America, Inc.. Some users want to uninstall this application. This can be hard because doing this by hand takes some experience regarding Windows program uninstallation. One of the best EASY manner to uninstall FANUC Robotics Virtual Robot Controller V7.40 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, add it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and general utility to optimize your Windows computer.

DOWNLOAD NOW

  • go to Download Link
  • download the program by pressing the DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take some time to get familiar with the program's interface and wealth of functions available. Advanced Uninstaller PRO is a powerful package of tools.

3. Click on the General Tools category
Go to General Tools


4. Click on the Uninstall Programs button
Go to Uninstall Programs


5. All the programs installed on your PC will be shown to you

6. Navigate the list of programs until you locate FANUC Robotics Virtual Robot Controller V7.40 or simply activate the Search field and type in "FANUC Robotics Virtual Robot Controller V7.40". If it is installed on your PC the FANUC Robotics Virtual Robot Controller V7.40 app will be found automatically. Notice that after you click FANUC Robotics Virtual Robot Controller V7.40 in the list of applications, the following data regarding the program is made available to you:


  • Safety rating (in the left lower corner). The star rating tells you the opinion other people have regarding FANUC Robotics Virtual Robot Controller V7.40, ranging from "Highly recommended" to "Very dangerous".
  • Reviews by other people - Click on the Read reviews button.
  • Technical information regarding the application you want to remove, by pressing the Properties button.
7. Click the Uninstall button. A confirmation page will show up. accept the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will then uninstall FANUC Robotics Virtual Robot Controller V7.40.
Uninstall FANUC Robotics Virtual Robot Controller V7.40


8. After uninstalling FANUC Robotics Virtual Robot Controller V7.40, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to start the cleanup. All the items of FANUC Robotics Virtual Robot Controller V7.40 which have been left behind will be detected and you will be able to delete them. By uninstalling FANUC Robotics Virtual Robot Controller V7.40 using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your disk.

Your Windows computer will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW


Geographical user distribution

  • Windows XP (5.1)
  • Windows 7 (6.1)
  • 10.0
Software Application


Disclaimer

The text above is not a piece of advice to remove FANUC Robotics Virtual Robot Controller V7.40 by FANUC Robotics America, Inc. from your PC, we are not saying that FANUC Robotics Virtual Robot Controller V7.40 by FANUC Robotics America, Inc. is not a good application. This text simply contains detailed instructions on how to remove FANUC Robotics Virtual Robot Controller V7.40 supposing you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2016-06-28 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2016-06-28 18:09:03.820