FANUC Robotics Virtual Robot Controller V7.70

A way to uninstall FANUC Robotics Virtual Robot Controller V7.70 from your PC

This web page contains detailed information on how to remove FANUC Robotics Virtual Robot Controller V7.70 for Windows. It was developed for Windows by FANUC Robotics America, Inc.. Go over here where you can find out more on FANUC Robotics America, Inc.. The program is usually installed in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC folder (same installation drive as Windows). RunDll32 is the full command line if you want to remove FANUC Robotics Virtual Robot Controller V7.70. frcreatevirtualrobot.exe is the programs's main file and it takes about 392.06 KB (401472 bytes) on disk.

FANUC Robotics Virtual Robot Controller V7.70 installs the following the executables on your PC, occupying about 620.11 KB (634997 bytes) on disk.

• frcreatevirtualrobot.exe (392.06 KB)
• frvirtual.exe (228.05 KB)

The information on this page is only about version 7.7092.45.03 of FANUC Robotics Virtual Robot Controller V7.70. For other FANUC Robotics Virtual Robot Controller V7.70 versions please click below:

• 7.70125.56.04
• 7.7059.24.05
• 7.7071.33.03
• 7.70102.52.04
• 7.70131.57.02
• 7.70117.55.06
• 7.7095.47.02
• 7.70138.58.02
• 7.7088.43.06
• 7.70112.54.03
• 7.7070.32.07
• 7.7083.40.08
• 7.70107.53.07
• 7.7090.44.04
• 7.7050.21.10
• 7.70100.51.10
• 7.7019.05.06
• 7.70125.56.03
• 7.7046.19.05
• 7.7065.28.07
• 7.7097.49.08
• 7.7002.00.02
• 7.70152.60.05
• 7.7096.48.02
• 7.70
• 7.7008.02.06
• 7.7034.14.08
• 7.7077.36.07

...click to view all...
After the uninstall process, the application leaves leftovers on the PC. Part_A few of these are listed below.

Directories that were found:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

Check for and delete the following files from your disk when you uninstall FANUC Robotics Virtual Robot Controller V7.70:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AAIR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ACST.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ADPT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AFLO.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ALLIBSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMGRAUX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMTASKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AOFS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAMGR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APCNTRL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APSPOTSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ASBN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCELLIF.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCHGP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AVST.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\BINASC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CETX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CFMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHIF.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHND.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CJMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CMMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CNMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COORDM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CPLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CRCRC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTHP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTKCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQTSKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DBMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DELTAX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOGTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DNLIBSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPCDICT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVFORM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVHTTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVMEMDEV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ENCDR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERLOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERRSEV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FCMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FNCELL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSOCK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSY.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GLOFILE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCOM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HTTPD.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IACMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IADG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IAMSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IBMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOPLCTSK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOSCAN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISTASKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSMON.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSTDIO.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LDCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK2.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LTGUIDE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSAT2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSLSMN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSMN2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPALAS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPS2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSWBIAS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MAMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCTMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFFLTR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFPTHCHK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGMMGR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGT1.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MIINTR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MJOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ML.DLL

Registry that is not cleaned:

• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{53F5FAAD-DA06-4A30-9811-7350DDB126F6}

A way to delete FANUC Robotics Virtual Robot Controller V7.70 from your computer with Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V7.70 is a program offered by FANUC Robotics America, Inc.. Frequently, computer users decide to remove this application. This is efortful because uninstalling this manually requires some know-how related to PCs. One of the best QUICK action to remove FANUC Robotics Virtual Robot Controller V7.70 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, install it. This is good because Advanced Uninstaller PRO is the best uninstaller and general utility to optimize your Windows system.

DOWNLOAD NOW

• visit Download Link
• download the program by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to get familiar with Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools category


4. Press the Uninstall Programs tool


5. A list of the programs existing on your PC will be shown to you

6. Scroll the list of programs until you find FANUC Robotics Virtual Robot Controller V7.70 or simply click the Search field and type in "FANUC Robotics Virtual Robot Controller V7.70". The FANUC Robotics Virtual Robot Controller V7.70 application will be found very quickly. Notice that after you select FANUC Robotics Virtual Robot Controller V7.70 in the list of applications, some information about the application is available to you:

• Safety rating (in the lower left corner). The star rating tells you the opinion other people have about FANUC Robotics Virtual Robot Controller V7.70, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Technical information about the program you want to uninstall, by pressing the Properties button.

7. Press the Uninstall button. A confirmation dialog will show up. Confirm the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will remove FANUC Robotics Virtual Robot Controller V7.70.


8. After removing FANUC Robotics Virtual Robot Controller V7.70, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to start the cleanup. All the items of FANUC Robotics Virtual Robot Controller V7.70 which have been left behind will be found and you will be able to delete them. By uninstalling FANUC Robotics Virtual Robot Controller V7.70 using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or directories are left behind on your computer.

Your Windows system will remain clean, speedy and able to take on new tasks.

Geographical user distribution

Disclaimer

The text above is not a recommendation to remove FANUC Robotics Virtual Robot Controller V7.70 by FANUC Robotics America, Inc. from your PC, nor are we saying that FANUC Robotics Virtual Robot Controller V7.70 by FANUC Robotics America, Inc. is not a good application for your computer. This page only contains detailed instructions on how to remove FANUC Robotics Virtual Robot Controller V7.70 supposing you decide this is what you want to do. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.