FANUC Robotics Virtual Robot Controller V8.30

A guide to uninstall FANUC Robotics Virtual Robot Controller V8.30 from your computer

FANUC Robotics Virtual Robot Controller V8.30 is a Windows program. Read below about how to remove it from your PC. It was coded for Windows by FANUC Robotics America, Inc.. You can read more on FANUC Robotics America, Inc. or check for application updates here. FANUC Robotics Virtual Robot Controller V8.30 is commonly installed in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC folder, but this location can differ a lot depending on the user's decision when installing the program. The full command line for removing FANUC Robotics Virtual Robot Controller V8.30 is RunDll32. Note that if you will type this command in Start / Run Note you may receive a notification for admin rights. FANUC Robotics Virtual Robot Controller V8.30's main file takes around 392.06 KB (401472 bytes) and is called frcreatevirtualrobot.exe.

FANUC Robotics Virtual Robot Controller V8.30 is composed of the following executables which occupy 620.11 KB (634997 bytes) on disk:

• frcreatevirtualrobot.exe (392.06 KB)
• frvirtual.exe (228.05 KB)

The information on this page is only about version 8.3039.02.10 of FANUC Robotics Virtual Robot Controller V8.30. You can find below info on other versions of FANUC Robotics Virtual Robot Controller V8.30:

• 8.30322.56.12
• 8.30104.12.14
• 8.30305.54.04
• 8.30281.44.08
• 8.3031.01.03
• 8.30413.70.05
• 8.30398.68.04
• 8.30245.37.09
• 8.30350.60.03
• 8.30405.69.05
• 8.30237.36.03
• 8.30261.40.03
• 8.30340.58.07
• 8.30366.62.03
• 8.30414.71.03
• 8.30390.67.03
• 8.3075.06.08
• 8.30298.52.05
• 8.30358.61.03
• 8.30218.33.06
• 8.30204.31.09
• 8.30291.48.03
• 8.30383.66.03
• 8.30170.23.09
• 8.30139.18.06
• 8.30131.17.10
• 8.30199.30.09
• 8.30367.63.04
• 8.30166.22.06
• 8.30189.28.05
• 8.30422.72.03
• 8.30
• 8.30330.57.05
• 8.30349.59.03

...click to view all...
FANUC Robotics Virtual Robot Controller V8.30 has the habit of leaving behind some leftovers.

You should delete the folders below after you uninstall FANUC Robotics Virtual Robot Controller V8.30:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

Usually, the following files remain on disk:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CPLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CRCRC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTHP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTKCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQTSKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DBMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DELTAX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOGTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DNLIBSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPCDICT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVFORM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVHTTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVMEMDEV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ENCDR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERLOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERRSEV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FCMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FNCELL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSOCK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSY.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GLOFILE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCOM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HTTPD.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IACMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IADG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IAMSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IBMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOPLCTSK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOSCAN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISTASKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSMON.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSTDIO.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LDCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK2.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LTGUIDE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSAT2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSLSMN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSMN2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPALAS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPS2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSWBIAS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MAMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCTMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFFLTR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFPTHCHK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGMMGR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGT1.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MIINTR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MJOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ML.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MLSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MMGRAUX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MMLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MMMEMO.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MMMPTC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MNTBLSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MODAQ.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MODEBUG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MOSTRMSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MPPLAN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MQ.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MRPGAP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\NE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\NECALC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ntcfg.dat
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\NTMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\NTPORT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\NTSERV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OFMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OSPPC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OSPPC081118.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OSPPCONS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OSPPSERV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OSTCHP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\OSTKEY.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\PBBTHD.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\PBDAQ.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\PBIOBLT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\PBIOSETU.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\PBMARRY.DLL

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{ACC5C1AD-626A-4DE6-8AEB-F4FF68A49D31}

A way to delete FANUC Robotics Virtual Robot Controller V8.30 from your computer with Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V8.30 is a program marketed by the software company FANUC Robotics America, Inc.. Sometimes, users try to remove this program. Sometimes this is troublesome because uninstalling this by hand takes some knowledge related to removing Windows applications by hand. One of the best QUICK way to remove FANUC Robotics Virtual Robot Controller V8.30 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, install it. This is good because Advanced Uninstaller PRO is an efficient uninstaller and all around tool to take care of your PC.

DOWNLOAD NOW

• go to Download Link
• download the program by pressing the green DOWNLOAD button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take some time to get familiar with the program's interface and wealth of features available. Advanced Uninstaller PRO is a very useful system utility.

3. Press the General Tools button


4. Click on the Uninstall Programs button


5. A list of the applications existing on your computer will be made available to you

6. Scroll the list of applications until you locate FANUC Robotics Virtual Robot Controller V8.30 or simply activate the Search field and type in "FANUC Robotics Virtual Robot Controller V8.30". If it is installed on your PC the FANUC Robotics Virtual Robot Controller V8.30 program will be found automatically. When you click FANUC Robotics Virtual Robot Controller V8.30 in the list of apps, some information about the application is shown to you:

• Star rating (in the left lower corner). This tells you the opinion other users have about FANUC Robotics Virtual Robot Controller V8.30, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Technical information about the application you want to uninstall, by pressing the Properties button.

7. Press the Uninstall button. A confirmation page will come up. Confirm the uninstall by pressing Uninstall. Advanced Uninstaller PRO will automatically remove FANUC Robotics Virtual Robot Controller V8.30.


8. After uninstalling FANUC Robotics Virtual Robot Controller V8.30, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to start the cleanup. All the items of FANUC Robotics Virtual Robot Controller V8.30 which have been left behind will be found and you will be asked if you want to delete them. By removing FANUC Robotics Virtual Robot Controller V8.30 with Advanced Uninstaller PRO, you can be sure that no registry items, files or folders are left behind on your system.

Your PC will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to remove FANUC Robotics Virtual Robot Controller V8.30 by FANUC Robotics America, Inc. from your computer, nor are we saying that FANUC Robotics Virtual Robot Controller V8.30 by FANUC Robotics America, Inc. is not a good software application. This page only contains detailed instructions on how to remove FANUC Robotics Virtual Robot Controller V8.30 in case you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.