MELSOFT iQ Works

How to uninstall MELSOFT iQ Works from your PC

This page is about MELSOFT iQ Works for Windows. Below you can find details on how to uninstall it from your PC. It was created for Windows by MITSUBISHI ELECTRIC CORPORATION. Further information on MITSUBISHI ELECTRIC CORPORATION can be seen here. Further information about MELSOFT iQ Works can be found at http://www.MitsubishiElectric.co.jp/melfansweb. The application is usually found in the C:\Program Files\MELSOFT folder (same installation drive as Windows). You can remove MELSOFT iQ Works by clicking on the Start menu of Windows and pasting the command line RunDll32. Keep in mind that you might be prompted for admin rights. MELSOFT iQ Works's primary file takes around 1.42 MB (1490432 bytes) and is named NV.exe.

The executable files below are part of MELSOFT iQ Works. They occupy about 139.46 MB (146229264 bytes) on disk.

• DataTransfer.exe (328.00 KB)
• DtComm.exe (36.00 KB)
• rcconv.exe (44.00 KB)
• ResourceConverter.exe (52.00 KB)
• DocumentConverter.exe (340.00 KB)
• gacutil.exe (80.00 KB)
• ECMonitoringLogger.exe (56.00 KB)
• VLINKS.exe (108.00 KB)
• ESIniCommTimeoutSet.exe (216.00 KB)
• Gppw.exe (1.81 MB)
• GD2.exe (392.00 KB)
• GD2IntelliToolsSCPrtcl.exe (520.00 KB)
• GX Works2 FastBoot.exe (172.00 KB)
• GX Works2 Progress.exe (80.00 KB)
• GX Works2 Service.exe (60.00 KB)
• GX Works2 Startup.exe (92.00 KB)
• MELHLP.exe (212.00 KB)
• IOSystem.exe (816.00 KB)
• SimManager.exe (76.00 KB)
• FXSimRun2.exe (296.00 KB)
• QnSimRun2.exe (1.17 MB)
• QuteSimRun.exe (1.07 MB)
• GT10USBDriver_Uninst.exe (643.52 KB)
• gtcnv2.exe (1.71 MB)
• BkupRstrDataConv.exe (252.00 KB)
• GTD2MES.exe (968.00 KB)
• GTD3.exe (12.73 MB)
• GTD3Progress.exe (400.50 KB)
• A900.exe (2.52 MB)
• GSS3.exe (747.50 KB)
• GT1000.exe (2.58 MB)
• GT1100.exe (6.44 MB)
• GT1200.exe (6.56 MB)
• GT1400.exe (6.54 MB)
• GT1500.exe (6.66 MB)
• GT1600.exe (6.76 MB)
• SDEB.exe (2.55 MB)
• SDEB_gt10.exe (8.66 MB)
• SDEB_GT11.exe (8.94 MB)
• SDEB_GT12.exe (9.39 MB)
• SDEB_gt14.exe (9.20 MB)
• SDEB_GT15.exe (9.14 MB)
• SDEB_GT16.exe (9.40 MB)
• gssb2j.exe (57.00 KB)
• gssbrs.exe (58.00 KB)
• lcpulutil.exe (2.59 MB)
• gacutil.exe (100.50 KB)
• NavigatorProgress.exe (189.00 KB)
• NV.exe (1.42 MB)
• MMSserve.exe (1.37 MB)
• ProfileManagement.exe (59.00 KB)
• MT Works2 Progress.exe (148.00 KB)
• MT2.exe (372.00 KB)
• MT2Inst.exe (148.00 KB)
• MTD2Test.exe (532.00 KB)
• SSC_CM.exe (176.00 KB)
• Ssc_Com_Tsk.exe (136.00 KB)
• MT Simulator2 Progress.exe (132.00 KB)
• MTS2Manager.exe (244.00 KB)
• QnDSimRun.exe (804.00 KB)
• OSC2.exe (2.28 MB)
• MELFA_RT.exe (6.91 MB)
• RoboCom.exe (400.00 KB)

...click to view all...

The current web page applies to MELSOFT iQ Works version 1.28 alone. You can find below info on other application versions of MELSOFT iQ Works:

• 1.20
• 1.00.4062
• 1.16
• 1.34
• 1.62
• 1.00.4043
• 1.74
• 04
• 1.43
• 1.32
• 1.00.4061

...click to view all...
MELSOFT iQ Works has the habit of leaving behind some leftovers.

You should delete the folders below after you uninstall MELSOFT iQ Works:

• C:\Program Files (x86)\MELSOFT

The files below are left behind on your disk when you remove MELSOFT iQ Works:

• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_CABSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_DABSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_EventManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_LogMaker.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_LogMakerInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_SatelliteSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_StatusManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZPlatform.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Common.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_CommonDeviceData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_CommonDeviceData2.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DataNavigator.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DataNavigatorThrough.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Device.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DeviceAccessor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Diagnose.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Monitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_MonitorStatus.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_NetworkAnalyzer.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_OnLineUnitChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcClock.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcFile.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcFunction.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcLabelData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryArrangement.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryClear.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryFormat.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcRemote.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcStatus.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_PlcDiagnose.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_SystemMonitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\GFPRDevice.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\CTREESTD.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Ado.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CodeGenerator.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CodeGeneratorAdapter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CommonProjectData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Compiler.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Compiler_IEC.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CompilerAdapter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CompressEncoder.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataCheckInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataManager_IEC.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceComment.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceInit.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceMemory.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_GIDProjConv.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_GIDProjConvIF.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_IParamData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_LibraryData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_LibraryParser.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OtherCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PackwinObject.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ParameterCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ParameterData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChangeInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ProductDataBase.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ProgramCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ProgramCheck_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ProgramCheck_RC_932.dll

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{48C00D97-E010-47A2-9ED5-AAE6B9FED81B}
• HKEY_LOCAL_MACHINE\Software\MITSUBISHI ELECTRIC CORPORATION\MELSOFT iQ Works

Additional registry values that you should delete:

• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MELSOFT Mediative Server\ImagePath

How to uninstall MELSOFT iQ Works with the help of Advanced Uninstaller PRO

MELSOFT iQ Works is a program released by MITSUBISHI ELECTRIC CORPORATION. Sometimes, people want to uninstall it. This can be hard because deleting this manually requires some skill related to Windows internal functioning. The best EASY solution to uninstall MELSOFT iQ Works is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to optimize your Windows computer.

DOWNLOAD NOW

• visit Download Link
• download the program by clicking on the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take some time to get familiar with Advanced Uninstaller PRO's interface and wealth of features available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Click on the General Tools button


4. Click on the Uninstall Programs button


5. A list of the applications installed on your PC will appear

6. Scroll the list of applications until you find MELSOFT iQ Works or simply activate the Search field and type in "MELSOFT iQ Works". If it exists on your system the MELSOFT iQ Works program will be found very quickly. Notice that after you select MELSOFT iQ Works in the list of programs, some data regarding the program is made available to you:

• Star rating (in the lower left corner). This explains the opinion other people have regarding MELSOFT iQ Works, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Technical information regarding the program you are about to uninstall, by clicking on the Properties button.

For instance you can see that for MELSOFT iQ Works:

• The publisher is: http://www.MitsubishiElectric.co.jp/melfansweb
• The uninstall string is: RunDll32

7. Click the Uninstall button. A confirmation page will show up. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will then uninstall MELSOFT iQ Works.


8. After uninstalling MELSOFT iQ Works, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to proceed with the cleanup. All the items of MELSOFT iQ Works which have been left behind will be detected and you will be able to delete them. By uninstalling MELSOFT iQ Works using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your computer.

Your Windows system will remain clean, speedy and ready to run without errors or problems.

Geographical user distribution

Disclaimer

This page is not a recommendation to remove MELSOFT iQ Works by MITSUBISHI ELECTRIC CORPORATION from your computer, we are not saying that MELSOFT iQ Works by MITSUBISHI ELECTRIC CORPORATION is not a good application for your PC. This text only contains detailed instructions on how to remove MELSOFT iQ Works in case you decide this is what you want to do. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.