MR Configurator2

A guide to uninstall MR Configurator2 from your system

This page is about MR Configurator2 for Windows. Here you can find details on how to remove it from your PC. It is produced by MITSUBISHI ELECTRIC CORPORATION. You can read more on MITSUBISHI ELECTRIC CORPORATION or check for application updates here. Further information about MR Configurator2 can be found at www.mitsubishielectric.com/fa/. Usually the MR Configurator2 application is to be found in the C:\Program Files (x86)\MELSOFT folder, depending on the user's option during install. The full command line for uninstalling MR Configurator2 is RunDll32. Keep in mind that if you will type this command in Start / Run Note you may be prompted for admin rights. MR Configurator2's main file takes around 437.50 KB (448000 bytes) and its name is MR2.exe.

The executable files below are installed beside MR Configurator2. They occupy about 106.57 MB (111746552 bytes) on disk.

• emahelp.exe (628.00 KB)
• eManualViewer.exe (713.00 KB)
• mlcgwf64.exe (1.14 MB)
• mvdbconv.exe (948.50 KB)
• mvreader.exe (2.89 MB)
• mvserver.exe (1.21 MB)
• gacutil.exe (80.00 KB)
• ECMonitoringLogger.exe (56.00 KB)
• ECMonitoringLoggerW.exe (62.50 KB)
• VLINKS.exe (108.00 KB)
• DPinst64.exe (1.00 MB)
• ESIniCommTimeoutSet.exe (204.00 KB)
• ESInitCommPingCountSet.exe (23.50 KB)
• Gppw.exe (1.82 MB)
• GD2.exe (488.00 KB)
• GD2IntelliToolsSCPrtcl.exe (588.00 KB)
• GX Works2 FastBoot.exe (172.00 KB)
• GX Works2 Progress.exe (80.00 KB)
• GX Works2 Service.exe (60.00 KB)
• GX Works2 Startup.exe (92.00 KB)
• MELHLP.exe (232.00 KB)
• IOSystem.exe (816.00 KB)
• SimManager.exe (76.00 KB)
• FXSimRun2.exe (296.00 KB)
• QnSimRun2.exe (1.02 MB)
• QnUDSimRun2.exe (1.02 MB)
• QnXSimRun2.exe (1.13 MB)
• QuteSimRun.exe (952.00 KB)
• GXW3.exe (3.60 MB)
• GXW3PluginPreloader.exe (147.00 KB)
• Progress.exe (77.00 KB)
• UsbIdentifier.exe (89.50 KB)
• UsbIdentifierKill.exe (29.50 KB)
• GXW3IntelliToolsSCPrtcl.exe (628.00 KB)
• EnvSetting.exe (32.00 KB)
• FSim3Dlg.exe (465.50 KB)
• GXS3ConnectionSetting2.exe (66.50 KB)
• GXS3IOSystem.exe (741.00 KB)
• GXS3SysSim.exe (1,011.00 KB)
• GXS3Zip.exe (35.50 KB)
• Sim3Dlg.exe (468.50 KB)
• FSimRun3.exe (218.50 KB)
• RSimRun3.exe (419.50 KB)
• CollectInfo.exe (53.50 KB)
• FTClean.exe (428.00 KB)
• FTDIUNIN.exe (411.00 KB)
• BkupRstrDataConv.exe (252.00 KB)
• GTD2MES.exe (968.00 KB)
• GTD3.exe (11.12 MB)
• GTD3Progress.exe (400.50 KB)
• A900.exe (2.52 MB)
• GSS3.exe (744.00 KB)
• GT1100.exe (6.02 MB)
• GT1500.exe (6.19 MB)
• GT1600.exe (6.23 MB)
• SDEB.exe (2.55 MB)
• SDEB_GT11.exe (7.91 MB)
• SDEB_GT15.exe (8.06 MB)
• SDEB_GT16.exe (8.22 MB)
• gssb2j.exe (56.00 KB)
• gssbrs.exe (56.00 KB)
• AmpConnectionConfirm.exe (417.00 KB)
• ModeChange.exe (1.93 MB)
• MR2.exe (437.50 KB)
• mr2AmptypeInstall.exe (383.50 KB)
• MR2kps.exe (50.50 KB)
• mr2OcxRegister.exe (300.50 KB)
• PleaseWait.exe (413.00 KB)
• MMSserve.exe (2.04 MB)
• ProfileDBUpdater.exe (12.00 KB)
• FlexUnitTool.exe (1.55 MB)
• FlexUnitTool.exe (1.53 MB)
• ProfileManagement.exe (234.00 KB)
• GX Works2 Progress.exe (76.00 KB)
• PMConfig.exe (213.00 KB)
• PMConfigv2.exe (222.00 KB)
• PMInst.exe (121.00 KB)
• PMCS2 Progress.exe (61.00 KB)
• PMCS2Manager.exe (549.50 KB)
• FX5SSCSimRun.exe (175.00 KB)
• RD77GFSimRun.exe (79.00 KB)
• RD77MSSimRun.exe (72.00 KB)
• MT2OSC2 Progress.exe (175.00 KB)
• OSC2.exe (3.20 MB)

...click to view all...

This page is about MR Configurator2 version 1.70 only. Click on the links below for other MR Configurator2 versions:

• 1.145
• 1.145.9999
• 1.53
• 1.150
• 1.150.9999
• 1.12
• 1.130
• 1.140
• 1.41
• 1.60.9999
• 1.25
• 1.125
• 1.45
• 1.52
• 1.115
• 1.100.9999
• 1.27
• 1.121
• 1.120
• 1.105.9999
• 1.121.9999
• 1.130.9999
• 1.115.9999
• 1.20
• 1.60
• 1.66
• 1.72
• 1.72.9999
• 1.64.9999
• 1.34
• 1.110.9999
• 1.125.9999
• 1.1505
• 1.66.9999
• 1.51
• 1.21
• 1.106
• 1.106.9999
• 1.1506
• 1.49
• 1.140.9999
• 1.110
• 1.64
• 1.105
• 1.63
• 1.63.9999
• 1.101.9999
• 1.23
• 1.101
• 1.33
• 1.19
• 1.55.9999
• 1.55
• 1.68
• 1.37
• 1.1008
• 1.68.9999
• 1.120.9999
• 07
• 1.134.9999
• 1.134
• 1.10
• 1.70.9999

...click to view all...
MR Configurator2 has the habit of leaving behind some leftovers.

Folders remaining:

• C:\Program Files (x86)\MELSOFT

Check for and delete the following files from your disk when you uninstall MR Configurator2:

• C:\Program Files (x86)\MELSOFT\DelslGpp.isu
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNavi.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviCnv.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviDB.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviForSLICE.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviIC.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviNetDB.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviPc.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviPcEasyFunction.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviPcFile.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviPcMonitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\_DNaviRawFile.dll
• C:\Program Files (x86)\MELSOFT\DNaviPlus\DNaviMes_English.rc.dat
• C:\Program Files (x86)\MELSOFT\DNaviPlus\DNaviMes_Japanese.rc.dat
• C:\Program Files (x86)\MELSOFT\DNaviPlus\DNaviServer.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpu_1.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpu_2.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpu_3.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpu_4.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpuButton_OFF.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpuButton_OFF_1.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpuButton_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\MultiCpu\QnMultiCpuButton_ON_1.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\AFBoard.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\AFBoard_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\CCIEFieldBoard.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\CCIEFieldBoard_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\CCLinkBoard.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\CCLinkBoard_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\CPUBoard.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\CPUBoard_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\EthernetBoard.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\EthernetBoard_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\Modemn.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\Modemn_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\NET10Board.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\NET10Board_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\NET2Board.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\NET2Board_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\QBus.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\QBus_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\Serial.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\Serial_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\SSC.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Pc_if\SSC_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\Bus.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\Bus_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CCLinkIEFieldEther.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CCLinkIEFieldEther_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CCLinkIEFieldHead.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CCLinkIEFieldHead_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CCLinkIEFieldUnit.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CCLinkIEFieldUnit_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CpuUnit.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\CpuUnit_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\G4.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\G4_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\GOT_OFF.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\GOT_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\MAC_OFF.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\MAC_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\NET10Unit.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\NET10Unit_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\NET2Unit.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\NET2Unit_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\SerialComUnit.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\SerialComUnit_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\Slot.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Plc_if\Slot_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\CCLink.BMP
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\CCLink_ON.BMP
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\CCLinkIEField.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\CCLinkIEField_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\ComputerLink.BMP
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\ComputerLink_ON.BMP
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\EtherNet.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\EtherNet_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\Net10.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\Net10_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\Net10h.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\Net10h_ON.BMP
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\NET2.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Route\NET2_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Station\Other_Mix.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Station\Other_Mix_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Station\Other_Simple.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Station\Other_Simple_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Station\OwnSt.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\Bmp\Station\OwnSt_ON.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\AVI\Monitor_Status.avi
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\AVI\Monitor_Status_FX.avi
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\Trb\ERR_CCLink_chs.csv
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\Trb\ERR_CCLink_cht.csv
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\Trb\ERR_CCLink_en.csv
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\Trb\ERR_CCLink_ja.csv
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLink\Trb\ERR_CCLink_ko.csv
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLinkIEField\AVI\Monitor_Status.avi
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLinkIEField\image\01_PLC.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLinkIEField\image\01_PLC_Active.bmp
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataResource\CCLinkIEField\image\01_PLC_Disconnect.bmp

Frequently the following registry keys will not be uninstalled:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{0A644D63-7BAF-4D2F-828E-E1FF6959E803}

Use regedit.exe to remove the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GD2.EXE.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GD2.EXE.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GX Simulator2\Common\SimManager.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GX Simulator2\Common\SimManager.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\App\GTD3_2000.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\App\GTD3_2000.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\GTD3_Startup.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\GTD3_Startup.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3\GTD3.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3\GTD3.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\MRC2\MR2.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\MRC2\MR2.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\GX Works2 Service\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MELSOFT Mediative Server\ImagePath

How to delete MR Configurator2 from your computer with Advanced Uninstaller PRO

MR Configurator2 is an application offered by the software company MITSUBISHI ELECTRIC CORPORATION. Sometimes, people decide to uninstall it. This is difficult because doing this by hand takes some experience regarding removing Windows programs manually. The best QUICK procedure to uninstall MR Configurator2 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to take care of your Windows system.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's design and number of tools available. Advanced Uninstaller PRO is a very useful system optimizer.

3. Click on the General Tools category


4. Press the Uninstall Programs tool


5. All the programs installed on the computer will be shown to you

6. Scroll the list of programs until you locate MR Configurator2 or simply click the Search feature and type in "MR Configurator2". If it is installed on your PC the MR Configurator2 application will be found automatically. Notice that after you click MR Configurator2 in the list of apps, some information regarding the program is shown to you:

• Star rating (in the lower left corner). This tells you the opinion other users have regarding MR Configurator2, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Technical information regarding the application you want to uninstall, by clicking on the Properties button.

For instance you can see that for MR Configurator2:

• The web site of the application is: www.mitsubishielectric.com/fa/
• The uninstall string is: RunDll32

7. Click the Uninstall button. A confirmation page will come up. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will then uninstall MR Configurator2.


8. After uninstalling MR Configurator2, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to go ahead with the cleanup. All the items of MR Configurator2 which have been left behind will be found and you will be able to delete them. By uninstalling MR Configurator2 with Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your computer.

Your Windows system will remain clean, speedy and ready to run without errors or problems.

Disclaimer

This page is not a recommendation to uninstall MR Configurator2 by MITSUBISHI ELECTRIC CORPORATION from your computer, nor are we saying that MR Configurator2 by MITSUBISHI ELECTRIC CORPORATION is not a good application for your PC. This text simply contains detailed info on how to uninstall MR Configurator2 supposing you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.