Publishers

Mastercam X4 Mastercam X4





How to uninstall Mastercam X4 from your system

This page contains thorough information on how to uninstall Mastercam X4 for Windows. The Windows version was created by CNC Software, Inc.. Open here for more info on CNC Software, Inc.. Mastercam X4 is normally set up in the C:\mcamx directory, regulated by the user's choice. The full command line for removing Mastercam X4 is C:\Program Files (x86)\InstallShield Installation Information\{B515E79E-EAE2-4515-A334-B8B8A609A43A}\setup.exe. Note that if you will type this command in Start / Run Note you may get a notification for admin rights. The program's main executable file is labeled setup.exe and occupies 428.00 KB (438272 bytes).

Mastercam X4 installs the following the executables on your PC, taking about 428.00 KB (438272 bytes) on disk.

  • setup.exe (428.00 KB)


The current page applies to Mastercam X4 version 13.0.3.31 only. Quite a few files, folders and Windows registry entries will not be removed when you remove Mastercam X4 from your PC.

Folders remaining:
  • C:\mcamx
  • C:\Users\%user%\AppData\Roaming\Mastercam

The files below were left behind on your disk when you remove Mastercam X4:
  • C:\mcamx\5axcore.dll
  • C:\mcamx\5axmsurf_util.dll
  • C:\mcamx\5axui.dll
  • C:\mcamx\5axutil.dll
  • C:\mcamx\Allowan.tbl
  • C:\mcamx\apps\art.dll
  • C:\mcamx\apps\ArtMachine.dll
  • C:\mcamx\apps\McAggrHead.dll
  • C:\mcamx\apps\McDef.VBB
  • C:\mcamx\apps\MCFileUpdateTracking.dll
  • C:\mcamx\apps\MCHUtl.dll
  • C:\mcamx\apps\MCSetupSheet.dll
  • C:\mcamx\apps\MCTUtl.dll
  • C:\mcamx\apps\MCTUtlA.dll
  • C:\mcamx\apps\MCVBscript.dll
  • C:\mcamx\apps\MP.dll
  • C:\mcamx\apps\NBM.dll
  • C:\mcamx\apps\Nesting.dll
  • C:\mcamx\apps\ThreadC.dll
  • C:\mcamx\apps\VersionChecker.dll
  • C:\mcamx\art\art material bitmaps\colors\Color Blue Glow Horizontal bar_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Blue Gradient_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Blue Horizontal bar_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Blue Water Horizontal bar_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Bubbles Blue_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Bubbles gray_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Gray Gradient_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Green Glow Horizontal bar_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Green Gradient_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Ivory Gradient_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Purple Gradient_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Rainbow.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Red Gradient_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Red Horizontal bar_256.bmp
  • C:\mcamx\art\art material bitmaps\colors\Color Yellow Horizontal bar_256.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Brick_256.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Leaf_256.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Marble_Green_256.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Marble_Salt_Pepper_256.b
  • C:\mcamx\art\art material bitmaps\materials\Material_Peacock_256.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Plaster_Green_14.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Rock_River_Mixed_256.bmp
  • C:\mcamx\art\art material bitmaps\materials\Material_Rock_River_Mixed_Large_2
  • C:\mcamx\art\art material bitmaps\metals\Metal_Brass_Bar_Horizontal_256.bm
  • C:\mcamx\art\art material bitmaps\metals\Metal_Brass_Bar_Vertical_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Brass_Crumple_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Brass_Spot__256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Brass_Square__256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_brushed_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Chrome_Bar_Horizontal_256.b
  • C:\mcamx\art\art material bitmaps\metals\Metal_Chrome_Bar_Vertical_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Chrome_Crumple_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Chrome_Spot_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Chrome_Square_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Copper_Bar_Horizontal_256.b
  • C:\mcamx\art\art material bitmaps\metals\Metal_Copper_bar_Vertical_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Copper_spot_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Copper_square_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold_Bar_Horizontal_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold_Bar_Vertical_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold_Bar_Vertical_256_color
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold_Crumple_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold_Foil_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold-1_Bar_Horizontal_256.b
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold-1_Bar_Vertical_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold-1_Crumple_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold-1_Spot_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Gold-1_Square_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Silver_Bar_Horizontal_256.b
  • C:\mcamx\art\art material bitmaps\metals\Metal_Silver_Bar_Vertical_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Silver_Crumple_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Silver_Spot__256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Silver_Square__256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Titanium_Bar_Horizontal_256
  • C:\mcamx\art\art material bitmaps\metals\Metal_Titanium_Bar_Verticle_256.b
  • C:\mcamx\art\art material bitmaps\metals\Metal_Titanium_Crumple_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Titanium_Spot_256.bmp
  • C:\mcamx\art\art material bitmaps\metals\Metal_Titanium_Square_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Bubbles Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Concrete Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Cork Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Crumple Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Gravel Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Grooves 45 Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Leaf Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Leather Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Marble Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture NagaHide Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Orange Peal Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Paint Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Pine Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Plaster Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Rock River Mixed Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Sand Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Snake Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Sponge Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Water Clouds Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Weave Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Wood Grain Tight Blond Gray_256.bmp
  • C:\mcamx\art\art material bitmaps\textures-gray\Texture Wood Bark Gray_256.bmp

Usually the following registry keys will not be cleaned:
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|Boltcircle.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|CD_Compare|CD_Compare.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Shared.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.Misc.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.UltraWinDataSource.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.UltraWinEditors.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.UltraWinExplorerBar.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.UltraWinGrid.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.UltraWinTabControl.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.UltraWinToolbars.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|Infragistics.Win.v4.3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|NativeResourceReader.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|PureComponents.NicePanel.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|XATP.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|xatp|XMLSettings.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|Zip2Go|C1.C1Zip.2.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|chooks|Zip2Go|Zip2Go.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|acisdata|SpaceClaimDocument.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.Chart.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.CodeDomSerializer.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.Design3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.HtmlExport.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.Interop.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.PdfExport.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.RtfExport.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.TextExport.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.TiffExport.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.Viewer3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.Web.Design.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.Web.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports.XlsExport.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports_Designer.exe
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports_Viewer.exe
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|ActiveReports3.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|common|reports|DataDynamics.ActiveReports.ToolBoxClassLib.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|DebuggingClientServerShared.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|MPDebugClient.exe
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|NativeResourceReader.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|nethook.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|NETHook2_0.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|resources|xatpres.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|mcamx|updateservice|Interop.FNCClient11Lib.dll
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Common Files|Mastercam|MastercamLicensing|ActivationWizard.exe
  • HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Common Files|Mastercam|MastercamLicensing|MastercamLicenseBorrowUtility.exe
  • HKEY_CURRENT_USER\Software\CNC Software, Inc.\Mastercam X4
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\4FAB5389D1B49B147A747F2F65AA80CD
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\AD07DE6377DD3774FBCBB6367FB701B7
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\E2B94240318957D4DA524F44EF29A794
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\E97E515B2EAE51543A438B8B6A904AA3
  • HKEY_LOCAL_MACHINE\Software\CNC Software, Inc.\Mastercam X4
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\InstallShield_{B515E79E-EAE2-4515-A334-B8B8A609A43A}

Use regedit.exe to remove the following additional values from the Windows Registry:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\mcamx\mastercam.exe.ApplicationCompany
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\mcamx\mastercam.exe.FriendlyAppName
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\Mastercam 2023\Mastercam\Mastercam.exe.ApplicationCompany
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\Mastercam 2023\Mastercam\Mastercam.exe.FriendlyAppName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\4FAB5389D1B49B147A747F2F65AA80CD\ProductName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\AD07DE6377DD3774FBCBB6367FB701B7\ProductName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\E2B94240318957D4DA524F44EF29A794\ProductName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\E97E515B2EAE51543A438B8B6A904AA3\ProductName


How to uninstall Mastercam X4 from your PC with Advanced Uninstaller PRO

Mastercam X4 is a program marketed by CNC Software, Inc.. Frequently, computer users choose to uninstall this application. Sometimes this can be easier said than done because uninstalling this by hand takes some knowledge related to Windows internal functioning. One of the best QUICK solution to uninstall Mastercam X4 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and general tool to optimize your Windows PC.

DOWNLOAD NOW

  • go to Download Link
  • download the program by pressing the DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take your time to get familiar with the program's design and wealth of functions available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Click on the General Tools button
Go to General Tools


4. Activate the Uninstall Programs button
Go to Uninstall Programs


5. A list of the applications installed on the PC will be shown to you

6. Navigate the list of applications until you find Mastercam X4 or simply click the Search feature and type in "Mastercam X4". If it exists on your system the Mastercam X4 application will be found very quickly. Notice that when you select Mastercam X4 in the list of programs, some data regarding the application is shown to you:


  • Star rating (in the left lower corner). The star rating explains the opinion other users have regarding Mastercam X4, from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Click on the Read reviews button.
  • Details regarding the application you want to remove, by pressing the Properties button.
7. Press the Uninstall button. A confirmation page will come up. Confirm the removal by pressing Uninstall. Advanced Uninstaller PRO will automatically remove Mastercam X4.
Uninstall Mastercam X4


8. After removing Mastercam X4, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to start the cleanup. All the items that belong Mastercam X4 that have been left behind will be detected and you will be able to delete them. By removing Mastercam X4 using Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your system.

Your computer will remain clean, speedy and able to run without errors or problems.

DOWNLOAD NOW


Geographical user distribution

  • Windows 7 (6.1)
  • 10.0
  • Windows XP (5.1)
  • Windows 8.1 (6.3)
  • Windows 8 (6.2)
  • Windows Vista (6.0)
Software Application


Disclaimer

The text above is not a recommendation to remove Mastercam X4 by CNC Software, Inc. from your computer, nor are we saying that Mastercam X4 by CNC Software, Inc. is not a good application. This page only contains detailed info on how to remove Mastercam X4 supposing you want to. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2016-06-26 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2016-06-26 05:45:51.247