Publishers

Application Omni-Rig 1.20





A guide to uninstall Omni-Rig 1.20 from your computer

Omni-Rig 1.20 is a Windows application. Read below about how to uninstall it from your PC. The Windows version was created by Alex Shovkoplyas, VE3NEA. Further information on Alex Shovkoplyas, VE3NEA can be found here. More data about the software Omni-Rig 1.20 can be seen at . Usually the Omni-Rig 1.20 application is to be found in the C:\Program Files (x86)\Afreet\OmniRig directory, depending on the user's option during install. The full command line for removing Omni-Rig 1.20 is C:\Program Files (x86)\Afreet\OmniRig\unins000.exe. Keep in mind that if you will type this command in Start / Run Note you may be prompted for administrator rights. OmniRig.exe is the programs's main file and it takes close to 2.55 MB (2669056 bytes) on disk.

The following executables are installed along with Omni-Rig 1.20. They take about 4.36 MB (4567349 bytes) on disk.

  • OmniRig.exe (2.55 MB)
  • OmniRigSetup.exe (1.12 MB)
  • unins000.exe (708.16 KB)


This web page is about Omni-Rig 1.20 version 1.20 only. Omni-Rig 1.20 has the habit of leaving behind some leftovers.

Folders remaining:
  • C:\Program Files (x86)\Afreet\OmniRig

Usually, the following files remain on disk:
  • C:\Program Files (x86)\Afreet\OmniRig\OmniRig.exe
  • C:\Program Files (x86)\Afreet\OmniRig\OmniRig.url
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\ADT-200A.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\AORAR5000.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\AR8600.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Bearcat996x.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\CODAN.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\CODAN-Comments.txt
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\DX-77.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\DX-77-Comments.txt
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Elad-FDMSW2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Elecraft K2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Elecraft K3.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Elecraft K4.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Elecraft KX2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\Elecraft KX3.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\ExpertSDR.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FRG-100.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-100 D.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-1000 MP.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-1000.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-2000.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-2000PEPV3.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-2K_Readme.txt
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-2KAFSKPEPV3.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-2KFSKPEPV3.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-450.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-450Dmod.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-747.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-747GX.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-747GX1.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-747GX2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-757GXII.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-817.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-840.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-847.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-857.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-891.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-897.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-900.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-920.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-950.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-990.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-991.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FT-991-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX_5000BETA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX10.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX101D.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-1200.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-1200-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-3000.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-3000-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-5000MP.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-5000MP-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\FTDX-9000.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\HRD.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC- 820.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC- 821.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC- 970D.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-275H.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7000.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7000v2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-703.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-703a.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-705.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-705-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-706 MKII.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-706 MKIIG.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-706.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-707.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7100.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7100-DATA-FIL1.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7100e4.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7100e4-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-718.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7200.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7200v2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7200v2_2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-725.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-725a.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-726.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-728.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7300.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7300-DATA.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7315.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-735.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-736 (untested).ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-737.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-738.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7410 (1).ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7410.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-7410v2.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-746 Pro.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-746.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-751.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-756 Pro II.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-756 Pro II_LSB.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-756 Pro III.ini
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-756 Pro ini comments.txt
  • C:\Program Files (x86)\Afreet\OmniRig\Rigs\IC-756 Pro.ini

Registry that is not removed:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Omni-Rig_is1


A way to delete Omni-Rig 1.20 from your computer with Advanced Uninstaller PRO

Omni-Rig 1.20 is an application marketed by the software company Alex Shovkoplyas, VE3NEA. Frequently, users want to erase it. Sometimes this is easier said than done because performing this by hand requires some advanced knowledge regarding Windows internal functioning. The best QUICK practice to erase Omni-Rig 1.20 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to maximize the performance of your Windows system.

DOWNLOAD NOW

  • visit Download Link
  • download the program by pressing the DOWNLOAD button
  • set up Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. Take your time to admire the program's design and number of features available. Advanced Uninstaller PRO is a very good program.

3. Click on the General Tools button
Go to General Tools


4. Press the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs installed on your PC will be shown to you

6. Navigate the list of programs until you locate Omni-Rig 1.20 or simply activate the Search feature and type in "Omni-Rig 1.20". If it exists on your system the Omni-Rig 1.20 application will be found very quickly. After you select Omni-Rig 1.20 in the list of programs, the following data regarding the program is made available to you:


  • Star rating (in the left lower corner). This explains the opinion other people have regarding Omni-Rig 1.20, from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Click on the Read reviews button.
  • Technical information regarding the program you wish to remove, by pressing the Properties button.
For example you can see that for Omni-Rig 1.20:





  • The web site of the application is: http://www.dxatlas.com/omnirig
  • The uninstall string is: C:\Program Files (x86)\Afreet\OmniRig\unins000.exe
7. Press the Uninstall button. A confirmation window will appear. Confirm the removal by pressing the Uninstall button. Advanced Uninstaller PRO will automatically remove Omni-Rig 1.20.
Uninstall Omni-Rig 1.20


8. After uninstalling Omni-Rig 1.20, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to proceed with the cleanup. All the items of Omni-Rig 1.20 which have been left behind will be found and you will be asked if you want to delete them. By removing Omni-Rig 1.20 using Advanced Uninstaller PRO, you can be sure that no registry items, files or folders are left behind on your PC.

Your PC will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW


Disclaimer

This page is not a recommendation to remove Omni-Rig 1.20 by Alex Shovkoplyas, VE3NEA from your computer, we are not saying that Omni-Rig 1.20 by Alex Shovkoplyas, VE3NEA is not a good application. This page only contains detailed instructions on how to remove Omni-Rig 1.20 supposing you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2021-10-23 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2021-10-23 15:45:27.730