OriginPro 8.5.1

A guide to uninstall OriginPro 8.5.1 from your system

This web page contains detailed information on how to remove OriginPro 8.5.1 for Windows. The Windows release was developed by OriginLab Corporation. You can read more on OriginLab Corporation or check for application updates here. More info about the software OriginPro 8.5.1 can be seen at www.OriginLab.com. The program is usually located in the C:\Program Files (x86)\OriginLab\Origin851 folder (same installation drive as Windows). The full command line for uninstalling OriginPro 8.5.1 is C:\Program Files (x86)\InstallShield Installation Information\{E1294D19-6193-4EC2-A077-6571012BDE5B}\setup.exe -runfromtemp -l0x0009 -removeonly. Note that if you will type this command in Start / Run Note you might receive a notification for admin rights. The program's main executable file is labeled Origin85.exe and it has a size of 453.81 KB (464704 bytes).

The following executables are installed alongside OriginPro 8.5.1. They occupy about 1.28 MB (1344320 bytes) on disk.

• Origin85.exe (453.81 KB)
• RunOriginFile.exe (16.00 KB)
• Sequencer.exe (24.50 KB)
• OClientUpdate.exe (64.00 KB)
• Origin3DScatter.exe (15.50 KB)
• Realtime Send Data To Wks.exe (15.00 KB)
• Realtime Send Matrix View Image.exe (14.50 KB)
• SendNumericDataToWks.exe (16.50 KB)
• FirstApp.exe (20.00 KB)
• SecondApp.exe (20.00 KB)
• SendTextDataToWks.exe (32.00 KB)
• Realtime Send Matrix View Image.exe (182.00 KB)
• SendNumericDataToWks.exe (187.00 KB)
• Realtime Send Matrix View Image.exe (212.00 KB)
• SendNumericDataToWks.exe (40.00 KB)

...click to view all...

The current web page applies to OriginPro 8.5.1 version 8.5.1 alone. If you are manually uninstalling OriginPro 8.5.1 we suggest you to verify if the following data is left behind on your PC.

You should delete the folders below after you uninstall OriginPro 8.5.1:

• C:\Program Files (x86)\OriginLab\Origin851

The files below remain on your disk when you remove OriginPro 8.5.1:

• C:\Program Files (x86)\OriginLab\Origin851\3d.ogs
• C:\Program Files (x86)\OriginLab\Origin851\3D.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DBARS.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DCmapError.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DError.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DMeshError.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DScatterMat.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DScatterMatErr.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DVECTOR.otp
• C:\Program Files (x86)\OriginLab\Origin851\3DVECTOR2.otp
• C:\Program Files (x86)\OriginLab\Origin851\3Ys_Y-YY.otp
• C:\Program Files (x86)\OriginLab\Origin851\3Ys_Y-Y-Y.otp
• C:\Program Files (x86)\OriginLab\Origin851\4Ys_YY-YY.otp
• C:\Program Files (x86)\OriginLab\Origin851\4Ys_Y-YYY.otp
• C:\Program Files (x86)\OriginLab\Origin851\ABFFIO.dll
• C:\Program Files (x86)\OriginLab\Origin851\ActiveQueryBuilderXControls.ocx
• C:\Program Files (x86)\OriginLab\Origin851\ADO.ogs
• C:\Program Files (x86)\OriginLab\Origin851\ANOVA1Way.OGS
• C:\Program Files (x86)\OriginLab\Origin851\ANOVA2Way.OGS
• C:\Program Files (x86)\OriginLab\Origin851\AppFile.ogs
• C:\Program Files (x86)\OriginLab\Origin851\AREA.OTP
• C:\Program Files (x86)\OriginLab\Origin851\ARROW.OGS
• C:\Program Files (x86)\OriginLab\Origin851\ASSAYS.OGS
• C:\Program Files (x86)\OriginLab\Origin851\ATI\include\FitFuncDef.h
• C:\Program Files (x86)\OriginLab\Origin851\ATI\include\LABSTR.H
• C:\Program Files (x86)\OriginLab\Origin851\ATI\include\ORGDLL.H
• C:\Program Files (x86)\OriginLab\Origin851\Axabffio32.dll
• C:\Program Files (x86)\OriginLab\Origin851\BAR.OTP
• C:\Program Files (x86)\OriginLab\Origin851\BAR3D.OTP
• C:\Program Files (x86)\OriginLab\Origin851\BASELINE.OGS
• C:\Program Files (x86)\OriginLab\Origin851\BASELINE.OPS
• C:\Program Files (x86)\OriginLab\Origin851\bf_info.csv
• C:\Program Files (x86)\OriginLab\Origin851\BOX.OTP
• C:\Program Files (x86)\OriginLab\Origin851\BROWSER.HTM
• C:\Program Files (x86)\OriginLab\Origin851\bs_bitma.bmp
• C:\Program Files (x86)\OriginLab\Origin851\BUBBLE.OTP
• C:\Program Files (x86)\OriginLab\Origin851\Candlestick.otp
• C:\Program Files (x86)\OriginLab\Origin851\cimage.OTP
• C:\Program Files (x86)\OriginLab\Origin851\CMAP.otp
• C:\Program Files (x86)\OriginLab\Origin851\COLUMN.OTP
• C:\Program Files (x86)\OriginLab\Origin851\ColumnLabel.otp
• C:\Program Files (x86)\OriginLab\Origin851\CONTGRAY.otp
• C:\Program Files (x86)\OriginLab\Origin851\CONTLINE.otp
• C:\Program Files (x86)\OriginLab\Origin851\CONTOUR.otp
• C:\Program Files (x86)\OriginLab\Origin851\ConvRandom.otp
• C:\Program Files (x86)\OriginLab\Origin851\COUNT.OTW
• C:\Program Files (x86)\OriginLab\Origin851\CoxPHM.OGS
• C:\Program Files (x86)\OriginLab\Origin851\CREATE.OTW
• C:\Program Files (x86)\OriginLab\Origin851\createPal.otp
• C:\Program Files (x86)\OriginLab\Origin851\CurvePreview.otp
• C:\Program Files (x86)\OriginLab\Origin851\custom.ogs
• C:\Program Files (x86)\OriginLab\Origin851\CustomTable\FitLinear.INI
• C:\Program Files (x86)\OriginLab\Origin851\CustomTable\FitLRXErr.INI
• C:\Program Files (x86)\OriginLab\Origin851\CustomTable\FitNL.INI
• C:\Program Files (x86)\OriginLab\Origin851\CustomTable\FitPolynomial.INI
• C:\Program Files (x86)\OriginLab\Origin851\CustomTable\PeakAnalyzer.INI
• C:\Program Files (x86)\OriginLab\Origin851\CustomTable\RegrFindXYorYX.txt
• C:\Program Files (x86)\OriginLab\Origin851\DBRoutines.OGS
• C:\Program Files (x86)\OriginLab\Origin851\Default.omc
• C:\Program Files (x86)\OriginLab\Origin851\DerivPreview.otp
• C:\Program Files (x86)\OriginLab\Origin851\DFORMD.DLL
• C:\Program Files (x86)\OriginLab\Origin851\dforrt.dll
• C:\Program Files (x86)\OriginLab\Origin851\digitize.ogs
• C:\Program Files (x86)\OriginLab\Origin851\DIGITIZE.otp
• C:\Program Files (x86)\OriginLab\Origin851\Digitizer.otp
• C:\Program Files (x86)\OriginLab\Origin851\DL35WD32.DLL
• C:\Program Files (x86)\OriginLab\Origin851\dllcdf.dll
• C:\Program Files (x86)\OriginLab\Origin851\dofile.ogs
• C:\Program Files (x86)\OriginLab\Origin851\DOUBLEY.OTP
• C:\Program Files (x86)\OriginLab\Origin851\DROPLINE.OTP
• C:\Program Files (x86)\OriginLab\Origin851\EBBMP2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBBMP2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBGIF2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBGIF2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBJPG2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBJPG2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBPCX2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBPCX2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBPNG2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBPNG2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBPSD2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBPSD2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBTGA2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBTGA2.INI
• C:\Program Files (x86)\OriginLab\Origin851\ebtif2.flt
• C:\Program Files (x86)\OriginLab\Origin851\ebtif2.ini
• C:\Program Files (x86)\OriginLab\Origin851\EBXPM2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBXPM2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EBXWD2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EBXWD2.INI
• C:\Program Files (x86)\OriginLab\Origin851\editPalTemplate.otp
• C:\Program Files (x86)\OriginLab\Origin851\EMCGM2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EMCGM2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EMDXF2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EMDXF2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EMPCT2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EMPCT2.INI
• C:\Program Files (x86)\OriginLab\Origin851\EMPDF2.FLT
• C:\Program Files (x86)\OriginLab\Origin851\EMPDF2.INI
• C:\Program Files (x86)\OriginLab\Origin851\emps_2.flt

Use regedit.exe to manually remove from the Windows Registry the keys below:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{E1294D19-6193-4EC2-A077-6571012BDE5B}
• HKEY_LOCAL_MACHINE\Software\OriginLab Corporation\OriginPro 8.5.1

A way to remove OriginPro 8.5.1 using Advanced Uninstaller PRO

OriginPro 8.5.1 is a program by the software company OriginLab Corporation. Sometimes, people try to erase this program. Sometimes this is hard because doing this manually requires some advanced knowledge related to Windows program uninstallation. One of the best SIMPLE manner to erase OriginPro 8.5.1 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, add it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to clean your Windows computer.

DOWNLOAD NOW

• go to Download Link
• download the program by clicking on the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's design and wealth of tools available. Advanced Uninstaller PRO is a powerful Windows tool.

3. Click on the General Tools button


4. Press the Uninstall Programs feature


5. All the applications installed on your PC will be made available to you

6. Navigate the list of applications until you find OriginPro 8.5.1 or simply click the Search field and type in "OriginPro 8.5.1". If it is installed on your PC the OriginPro 8.5.1 app will be found very quickly. Notice that when you select OriginPro 8.5.1 in the list , some information about the program is shown to you:

• Star rating (in the left lower corner). The star rating explains the opinion other people have about OriginPro 8.5.1, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other people - Click on the Read reviews button.
• Details about the program you are about to uninstall, by clicking on the Properties button.

For instance you can see that for OriginPro 8.5.1:

• The publisher is: www.OriginLab.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{E1294D19-6193-4EC2-A077-6571012BDE5B}\setup.exe -runfromtemp -l0x0009 -removeonly

7. Click the Uninstall button. A confirmation window will come up. accept the uninstall by pressing Uninstall. Advanced Uninstaller PRO will remove OriginPro 8.5.1.


8. After uninstalling OriginPro 8.5.1, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to proceed with the cleanup. All the items of OriginPro 8.5.1 which have been left behind will be detected and you will be able to delete them. By removing OriginPro 8.5.1 using Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your computer.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall OriginPro 8.5.1 by OriginLab Corporation from your PC, we are not saying that OriginPro 8.5.1 by OriginLab Corporation is not a good software application. This text only contains detailed instructions on how to uninstall OriginPro 8.5.1 in case you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.