SIMATIC WinCC/Connectivity Station V7.5 + SP2

How to uninstall SIMATIC WinCC/Connectivity Station V7.5 + SP2 from your PC

This web page is about SIMATIC WinCC/Connectivity Station V7.5 + SP2 for Windows. Below you can find details on how to uninstall it from your computer. The Windows release was developed by Siemens AG. Go over here where you can get more info on Siemens AG. Further information about SIMATIC WinCC/Connectivity Station V7.5 + SP2 can be seen at http://www.siemens.com/automation/service&support. The program is frequently placed in the C:\Program Files (x86)\Siemens folder (same installation drive as Windows). The entire uninstall command line for SIMATIC WinCC/Connectivity Station V7.5 + SP2 is C:\Program Files (x86)\Common Files\Siemens\Bin\setupdeinstaller.exe. The program's main executable file is called WinCCExplorer.exe and its approximative size is 1.15 MB (1204072 bytes).

The executables below are part of SIMATIC WinCC/Connectivity Station V7.5 + SP2. They occupy an average of 83.42 MB (87472096 bytes) on disk.

• sopcaesvrconn.exe (410.85 KB)
• sopcdasvrconn.exe (475.35 KB)
• sopchdasvrconn.exe (441.35 KB)
• OpcUaServerConnStat.exe (6.31 MB)
• AutoStartRT.exe (215.85 KB)
• BildAnw.exe (415.85 KB)
• CAArchiveManagerBackupCopyx.exe (377.35 KB)
• CCActualizeTextRef.exe (13.85 KB)
• CCAlgIAlarmDataCollector.exe (221.85 KB)
• CcAlgRtServer.exe (145.85 KB)
• CCCleaner.exe (78.35 KB)
• CCClientAPIs.exe (154.85 KB)
• CCCloudConnect.exe (319.35 KB)
• CCCSigRTServer.exe (510.35 KB)
• CCDeltaLoader.exe (868.85 KB)
• CCDMClientHelper.exe (98.35 KB)
• CCDmRtChannelHost.exe (646.35 KB)
• CCDmRuntimePersistence.exe (254.35 KB)
• CCEmergencyWatchRTServer.exe (694.85 KB)
• CCHelpStarter.exe (39.35 KB)
• CCKeyboardHook.exe (20.35 KB)
• CCKopApiExe.exe (648.35 KB)
• CCLBMRTServer.exe (242.85 KB)
• CCMcpAutServer.exe (115.35 KB)
• CCMigrator.exe (259.85 KB)
• CCNSInfo2Provider.exe (754.85 KB)
• CCOnlCmp.exe (457.85 KB)
• CCPackageMgr.exe (520.85 KB)
• CcPJob.exe (959.85 KB)
• CCProfileServer.exe (110.85 KB)
• CCProjectDuplicator.exe (169.85 KB)
• CCProjectMgr.exe (2.01 MB)
• CCPtmRTServer.exe (483.35 KB)
• CCRedCodi.exe (181.35 KB)
• CCRestService.exe (1.04 MB)
• CCRtsLoader.exe (120.85 KB)
• CCRtsLoader_x64.exe (150.85 KB)
• CCRunRedCodiCS.exe (56.35 KB)
• CCScriptEditor.exe (6.26 MB)
• CCSplash.exe (111.85 KB)
• CCSsmRTServer.exe (601.85 KB)
• CCStartHWK.exe (24.85 KB)
• CCStartStop.exe (43.85 KB)
• CCSystemDiagnosticsHost.exe (100.35 KB)
• CCTextDistributor.exe (303.35 KB)
• CCTextServer.exe (647.85 KB)
• CCTlgNormDllHost.exe (194.85 KB)
• CCTlgServer.exe (144.85 KB)
• CCTMConfiguration.exe (133.35 KB)
• CCTMTimeSync.exe (466.35 KB)
• CCTMTimeSyncServer.exe (374.35 KB)
• CCUASetupDCOM.exe (55.35 KB)
• CCUCSurrogate.exe (332.35 KB)
• CCUsrAcv.exe (1.69 MB)
• CCXREF.Presentation.Editor.exe (178.85 KB)
• CC_DPSRV.EXE (132.35 KB)
• CC_MShh.exe (64.35 KB)
• ChannelWrapperCS.exe (221.85 KB)
• ChannelWrapperCS_v100.exe (151.85 KB)
• Grafexe.exe (5.97 MB)
• gsccs.exe (612.85 KB)
• gscrt.exe (6.06 MB)
• HMRT.exe (620.85 KB)
• LBMCS.exe (542.35 KB)
• OPCTags.exe (329.35 KB)
• PassDBRT.exe (551.85 KB)
• PassReg.exe (21.85 KB)
• PdlRt.exe (1.43 MB)
• PdlServ.exe (246.35 KB)
• Print1.exe (397.85 KB)
• PrintIt.exe (555.35 KB)
• Projecteditor.exe (454.85 KB)
• ProtCS.exe (749.35 KB)
• QuoteAutomationServices.exe (3.54 MB)
• Rd1CS.exe (253.85 KB)
• RptRT.exe (202.35 KB)
• script.exe (120.35 KB)
• SDiagRT.exe (213.35 KB)
• setupdcom.exe (73.35 KB)
• SimotionMapper.exe (123.35 KB)
• SSMButtonsConfigurator.exe (365.85 KB)
• SSMSettings.exe (203.85 KB)
• WinCCChnDiag.exe (28.35 KB)
• WinCCConfigurator.exe (160.35 KB)
• WinCCExplorer.exe (1.15 MB)
• SampleClientAE.exe (108.00 KB)
• SampleClientHDA.exe (232.00 KB)
• WinCCRtKbdFilterRegister.exe (65.34 KB)
• WinCCRtKbdFilterRegister.exe (67.84 KB)
• ccaeprovider.exe (939.35 KB)
• sopcaesrvrwincc.exe (410.35 KB)
• sopcsrvrwincc.exe (475.35 KB)
• sopchdasrvrwincc.exe (440.85 KB)
• CCOpcUaImporter.exe (2.48 MB)
• CcUaDAS.exe (5.49 MB)
• OpcUaServerWinCC.exe (6.31 MB)
• CCRT2XML.exe (197.35 KB)
• DA2XML.exe (470.35 KB)
• CCCrossReferenceAssistant.exe (380.85 KB)
• DynWizEdit.exe (223.35 KB)
• CcMetaView.exe (168.35 KB)
• Simulation.exe (347.85 KB)
• apdiag.exe (138.85 KB)
• CCScriptInspector.exe (6.08 MB)
• DiagServ.exe (151.35 KB)
• PDLCSApiTest.exe (208.35 KB)
• Var_Exim.exe (228.85 KB)

...click to view all...

The information on this page is only about version 07.05.0200 of SIMATIC WinCC/Connectivity Station V7.5 + SP2. SIMATIC WinCC/Connectivity Station V7.5 + SP2 has the habit of leaving behind some leftovers.

Directories found on disk:

• C:\Program Files (x86)\Siemens

Generally, the following files are left on disk:

• C:\Program Files (x86)\Siemens\Automation Projects\SPOSA.dcf
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\AlarmEvent\Bin\OPCAlarmServer.ini
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\AlarmEvent\Bin\sopcaesvrconn.exe
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\DataAccess\Bin\sopcdasvrconn.exe
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\DataAccess\Bin\SOPCSRVR.ini
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\HistDataAccess\Bin\SOPCHDASRVR.ini
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\HistDataAccess\Bin\sopchdasvrconn.exe
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\libcrypto-1_1.dll
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\libssl-1_1.dll
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\libxml2.dll
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\OpcUaServerConnStat.exe
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\OpcUaServerConnStat.xml
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\PKI\CA\certs\Siemens OPC UA Server for WinCC Connectivity Station.der
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\PKI\CA\private\Siemens OPC UA Server for WinCC Connectivity Station.pfx
• C:\Program Files (x86)\Siemens\ConnectivityStation\OPC\UAServer\uastack.dll
• C:\Program Files (x86)\Siemens\ConnectivityStation\SSC\ConnStat.xml
• C:\Program Files (x86)\Siemens\ConnectivityStation\SSC\OpcUaServerConnStat_Security.xml
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Chinese\S7-PLCSIM -  S7-CPU  - .lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Chinese\S7-PLCSIM - S7ProSim  - .lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Chinese\SIMATIC Logon - ??.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Deutsch\Automation License Manager - Handbuch.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Deutsch\S7-PLCSIM - Programmierschnittstelle S7ProSim - Handbuch.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Deutsch\S7-PLCSIM - Programmtest mit simulierter S7-CPU - Handbuch.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Deutsch\SIMATIC Logon - Handbuch.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\Automation License Manager - Manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\InformationSystem.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\NCM S7 - Manuals.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\S7-GRAPH - First Steps with S7 GRAPH.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\S7-GRAPH - Programming Sequential Control Systems.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\S7-PLCSIM - Interface of S7ProSim - manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\S7-PLCSIM - Testing Your S7-CPU Programs - manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\S7-SCL - Working with S7-SCL.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\S7-SCL for S7-300 and S7-400 - manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\SIMATIC Logon - Manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Configuring Hardware with STEP 7.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Fault-Tolerant Systems.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - From S5 to S7.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Function Block Diagram for S7-300 and S7-400.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Ladder Logic for S7-300 and S7-400.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Modifying the System During Operation via CiR.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - New Modules.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - PID Control.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - PID Temperature Control.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Programming with STEP 7.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Statement List for S7-300 and S7-400.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - System and Standard Functions for S7-300 and S7-400 Part 2.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - System and Standard Functions for S7-300 and S7-400.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\STEP 7 - Working with STEP 7.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\WinCC Information System.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\English\WinCC SmartTools.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Español\Automation License Manager - Manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Español\S7-PLCSIM - Programar con S7ProSim - Manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Español\S7-PLCSIM - Test de programa con S7-CPU simulada - Manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Español\SIMATIC Logon - Manual.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Français\Automation License Manager - Manuel.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Français\S7-PLCSIM - Interface de Programmation S7ProSim - manuel.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Français\S7-PLCSIM - Tester les programmes S7 - manuel.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Français\SIMATIC Logon - Manuel.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Italiano\Automation License Manager - Manuale.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Italiano\S7-PLCSIM - per testare i programmi S7 - manuale.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Italiano\S7-PLCSIM - Programmazione con S7ProSim - manuale.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Italiano\SIMATIC Logon - Manuale.lnk
• C:\Program Files (x86)\Siemens\Documentation\Manuals\Japanese\SIMATIC Logon - ?????.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Chinese\S7-PLCSIM - .lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Chinese\SIMATIC Logon - ??.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\Automation License Manager - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\NCM S7 - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\S7-GRAPH - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\S7-PCT - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\S7-PLCSIM - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\S7-SCL - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\SIMATIC Logon - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\STEP 7 - Liesmich.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Deutsch\STEP 7 - Verträglichkeitsliste.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\Automation License Manager - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\NCM S7 - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\S7-Block Privacy - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\S7-GRAPH - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\S7-PCT - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\S7-PLCSIM - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\S7-SCL - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\S7-Web2PLC - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\SIMATIC Logon - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\STEP 7 - Compatibility list.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\English\STEP 7 - Readme.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\Automation License Manager - Leame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\NCM S7 - Léame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\S7-GRAPH - Léame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\S7-PCT - Leame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\S7-PLCSIM - Léame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\S7-SCL - Léame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\SIMATIC Logon - Leame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\STEP 7 - Léame.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Español\STEP 7 - Lista de compatibilidad.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Français\Automation License Manager - Lisezmoi.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Français\NCM S7 - Lisezmoi.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Français\S7-GRAPH - Lisezmoi.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Français\S7-PCT - Lisezmoi.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Français\S7-PLCSIM - Lisezmoi.lnk
• C:\Program Files (x86)\Siemens\Documentation\Readmes\Français\S7-SCL - Lisezmoi.lnk

You will find in the Windows Registry that the following data will not be removed; remove them one by one using regedit.exe:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{1EB668CF-E4C5-4F4D-85AC-0E2D8F7FC761}Connectivity Station

Additional registry values that you should clean:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~2\SIEMENS\PLCSim\s7wsi\s7wsvapx.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~2\SIEMENS\PLCSim\s7wsi\s7wsvapx.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Siemens\SIMATIC WinCC flexible\WinCC flexible 2008\HmiES.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Siemens\SIMATIC WinCC flexible\WinCC flexible 2008\HmiES.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Siemens\Step7\S7BIN\S7tgtopx.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Siemens\Step7\S7BIN\S7tgtopx.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\OpcUaServerConnStat\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SIMATIC Logon Device Manager\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SIMATIC Logon Event Logging\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SIMATIC Logon Service\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SlraService\ImagePath

How to uninstall SIMATIC WinCC/Connectivity Station V7.5 + SP2 with Advanced Uninstaller PRO

SIMATIC WinCC/Connectivity Station V7.5 + SP2 is a program marketed by the software company Siemens AG. Frequently, computer users try to remove it. This is troublesome because performing this by hand requires some experience regarding removing Windows applications by hand. The best EASY way to remove SIMATIC WinCC/Connectivity Station V7.5 + SP2 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to maximize the performance of your Windows PC.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by pressing the DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire Advanced Uninstaller PRO's design and wealth of functions available. Advanced Uninstaller PRO is a powerful program.

3. Press the General Tools category


4. Click on the Uninstall Programs tool


5. A list of the programs existing on the PC will appear

6. Scroll the list of programs until you find SIMATIC WinCC/Connectivity Station V7.5 + SP2 or simply click the Search field and type in "SIMATIC WinCC/Connectivity Station V7.5 + SP2". If it is installed on your PC the SIMATIC WinCC/Connectivity Station V7.5 + SP2 application will be found automatically. Notice that when you click SIMATIC WinCC/Connectivity Station V7.5 + SP2 in the list of applications, some information about the application is made available to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other people have about SIMATIC WinCC/Connectivity Station V7.5 + SP2, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Details about the program you are about to uninstall, by pressing the Properties button.

For instance you can see that for SIMATIC WinCC/Connectivity Station V7.5 + SP2:

• The web site of the application is: http://www.siemens.com/automation/service&support
• The uninstall string is: C:\Program Files (x86)\Common Files\Siemens\Bin\setupdeinstaller.exe

7. Press the Uninstall button. A window asking you to confirm will come up. accept the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will then remove SIMATIC WinCC/Connectivity Station V7.5 + SP2.


8. After uninstalling SIMATIC WinCC/Connectivity Station V7.5 + SP2, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to start the cleanup. All the items of SIMATIC WinCC/Connectivity Station V7.5 + SP2 that have been left behind will be detected and you will be able to delete them. By removing SIMATIC WinCC/Connectivity Station V7.5 + SP2 with Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your system.

Your Windows PC will remain clean, speedy and able to run without errors or problems.

Disclaimer

This page is not a piece of advice to remove SIMATIC WinCC/Connectivity Station V7.5 + SP2 by Siemens AG from your PC, we are not saying that SIMATIC WinCC/Connectivity Station V7.5 + SP2 by Siemens AG is not a good application for your PC. This page only contains detailed instructions on how to remove SIMATIC WinCC/Connectivity Station V7.5 + SP2 in case you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.