SolidWorks 2011 x64 Edition SP05

A guide to uninstall SolidWorks 2011 x64 Edition SP05 from your PC

SolidWorks 2011 x64 Edition SP05 is a Windows program. Read below about how to remove it from your PC. It was developed for Windows by SolidWorks Corporation. Open here where you can get more info on SolidWorks Corporation. Further information about SolidWorks 2011 x64 Edition SP05 can be seen at http://www.solidworks.com. SolidWorks 2011 x64 Edition SP05 is typically set up in the C:\Program Files\SolidWorks Corp directory, but this location may vary a lot depending on the user's option when installing the program. You can remove SolidWorks 2011 x64 Edition SP05 by clicking on the Start menu of Windows and pasting the command line C:\Windows\SolidWorks\IM_20110-40500-1100-100\sldim\sldIM.exe. Keep in mind that you might get a notification for administrator rights. The program's main executable file is titled swspmanager.exe and its approximative size is 1.38 MB (1446984 bytes).

SolidWorks 2011 x64 Edition SP05 installs the following the executables on your PC, taking about 102.34 MB (107306952 bytes) on disk.

• DsgnChkRptView.exe (212.57 KB)
• gabiswengine.exe (2.25 MB)
• LocalSldService.exe (14.57 KB)
• propertyManagerUpload.exe (255.07 KB)
• RTLibraryManager.exe (4.84 MB)
• setcatenv.exe (36.29 KB)
• sldbgproc.exe (46.57 KB)
• sldexitapp.exe (135.57 KB)
• sldphotoshopcon.exe (96.07 KB)
• sldProcMon.exe (63.07 KB)
• sldShellExtServer.exe (61.07 KB)
• SldToolboxConfigure.exe (7.73 MB)
• sldu3d.exe (13.66 MB)
• SLDWORKS.exe (2.20 MB)
• swspmanager.exe (1.38 MB)
• UtlReportViewer.exe (159.57 KB)
• pidcollector.exe (24.00 KB)
• innovahxreg.exe (61.54 KB)
• circuitworks.exe (605.79 KB)
• driveworksxpressdt.exe (16.50 KB)
• Dsgnchkbldu.exe (2.52 MB)
• DsgnChkDesignBinderu.exe (198.50 KB)
• photoview360.exe (555.80 KB)
• photoview360_cl.exe (539.80 KB)
• swlmwiz.exe (1.50 MB)
• ServiceInst.exe (55.50 KB)
• ans2cos.exe (987.07 KB)
• check.exe (196.79 KB)
• cos2abq.exe (934.79 KB)
• cos2ans.exe (728.29 KB)
• cos2nas.exe (1,010.79 KB)
• cos2pat.exe (689.79 KB)
• cos2xds.exe (654.79 KB)
• cwanalysisproc.exe (69.57 KB)
• cwmeshproc.exe (33.57 KB)
• dpost.exe (638.79 KB)
• dstar.exe (2.78 MB)
• fat.exe (1.04 MB)
• ghs3d.exe (2.73 MB)
• ghs3dv3.exe (2.42 MB)
• hstar.exe (2.80 MB)
• ids2cos.exe (1,017.79 KB)
• nas2cos.exe (933.29 KB)
• nstar.exe (4.54 MB)
• ParametricObject.exe (179.57 KB)
• pat2cos.exe (784.29 KB)
• postans.exe (103.07 KB)
• pre1.exe (35.07 KB)
• renum.exe (35.07 KB)
• star.exe (8.98 MB)
• stopt.exe (555.07 KB)
• stres.exe (638.29 KB)
• swactwiz.exe (4.08 MB)
• swlicservinst.exe (256.57 KB)
• swactwiz.exe (5.58 MB)
• swlicservinst.exe (256.57 KB)
• cosmos cleaning utility.exe (65.29 KB)
• cosmossupporttool.exe (249.29 KB)
• material.exe (345.27 KB)
• sld3dViaUploader.exe (160.00 KB)
• sldBenchmark.exe (721.50 KB)
• PropertyTabBuilder.exe (860.00 KB)
• sldrx.exe (1.99 MB)
• sldrxmm.exe (109.57 KB)
• GtReportManager.exe (200.00 KB)
• DTSCoordinatorService.exe (87.07 KB)
• DTSMonitor.exe (587.07 KB)
• DTSServiceManager.exe (15.07 KB)
• swBOEngine.exe (919.57 KB)
• swScheduler.exe (1.89 MB)
• drawcompare.exe (237.29 KB)
• swvbaserver.exe (364.00 KB)
• sldsetdocprop.exe (5.22 MB)
• UpdateBrowserData.exe (362.07 KB)
• eDrawingOfficeAutomator.exe (1.36 MB)
• EModelViewer.exe (391.00 KB)
• swlicservinst.exe (257.29 KB)

...click to view all...

This info is about SolidWorks 2011 x64 Edition SP05 version 19.5.0.91 only. If you're planning to uninstall SolidWorks 2011 x64 Edition SP05 you should check if the following data is left behind on your PC.

Folders that were left behind:

• C:\Program Files\SolidWorks Corp
• C:\Users\%user%\AppData\Local\Microsoft\VSTAHost\SolidWorks_VSTA
• C:\Users\%user%\AppData\Local\SolidWorks
• C:\Users\%user%\AppData\Local\Temp\SolidWorks

Generally, the following files remain on disk:

• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CAT3DXMLCGRFromXVL.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CAT3DXmlImportManager.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CAT3DXmlImportTools.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CAT3DXmlInterfaces.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CAT3DXmlLightBaseServices.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CAT3DXMLXCADAdapter.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATBinaryXml.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATLightXml.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATMathematics.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATMathStream.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATObjectModelerBase.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATObjectModelerItf.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATObjectModelerNavigator.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATOmbTom.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATOmbUtils.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATOmbWSystem.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATOmiClusterItf.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATSysAllocator.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATSysFile.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATSysMainThreadMQ.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATSysMultiThreading.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATSysTS.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATVisDmuStream.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATVisOpenGL.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATVisShader.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATVisXMLStream.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATViz.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATVizIterators.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATVizLOD.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CATXMLParserItf.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\CGRFromTessDataExport.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\DataExchangeBaseRepsItf.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\DataExchangeKernelItf.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\eDrawingOfficeAutomator.exe
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EDrawings3dXMLReader.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\eDrawingsGraphicsCardClient.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\eDrawingsGraphicsCardClient.tlb
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\edrwthumbnailprovider.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModel3DXMLXlator.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelAddIn.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelAddIn_libFNP.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelEventLog.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelEx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelMDReader.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelReviewer.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelSWDisplayLists.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelUtils.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelUtilsVista.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelView.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelViewer.exe
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelXlator.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelXlatorCALS.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelXlatorProE.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWAGDT.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWAstro.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWComp.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWGothE.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWGothG.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWGothI.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWGrekC.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWGrekS.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWIsoP1.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWIsoP2.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWIsoP3.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWIsoT1.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWIsoT2.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWIsoT3.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWItal.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWItalC.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWItalT.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWMap.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWMath.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWMeteo.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWMono.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWMusic.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWRomC.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWRomD.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWRomS.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWRomT.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWScripC.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWScripS.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWSimp.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\fonts\SWTxt.shx
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\GraphicsCardInfo.xml
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\GTOL.sym
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\hoops1700_x64_vc90.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\HoopsManager.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\icudt38.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\icuuc38.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\images\background\earlymorning.png
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\IMPLODE.DLL
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\JS0FM.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\JS0GROUP.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\JS0SMT.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\JS0SPEXT.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\JS0ZLIB.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\lang\chinese\EModelXlatorCALSRes.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\lang\chinese-simplified\EModelXlatorCALSRes.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\lang\czech\EModelXlatorCALSRes.dll
• C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\lang\english\ActivationLegalPolicy.htm

You will find in the Windows Registry that the following data will not be cleaned; remove them one by one using regedit.exe:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|SolidWorks Corp|SolidWorks eDrawings|eDrawingsGraphicsCardClient.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks eDrawings|eDrawingsGraphicsCardClient.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|api|redist|SolidWorks.Interop.cosworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|dznet.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|sldPropertyTabBuilder|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|sldxps.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.IRemoteInteropObjectContract.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.MacroBuilder.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.Proxy.Sldworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|swfeedback.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|swVBAServer|swfeedback.dll
• HKEY_CLASSES_ROOT\SolidWorks Installation Manager
• HKEY_CLASSES_ROOT\SolidWorks.EvaluateGraphicsClient.11
• HKEY_CLASSES_ROOT\SolidWorks.EvaluateGraphicsClient.EDrawingsGraphicsCardClientTest
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.CadRef
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAngleBetween
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAngularity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAppliedDatum
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAppliedFeature
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtArc
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitArc
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitClosedSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitCone
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitCylinder
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitEllipse
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitSphere
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitTorus
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBlockTolerances
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCentroidCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCentroidPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtChamfer
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCircularity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCircularRunout
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtClosedSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositeDistanceBetween
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositeLineProfile
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositePosition
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositeSurfaceProfile
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundClosedSlot3D
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundHole
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundNotch
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundWidth
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtConcentricity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCone
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCornerPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCorTol
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCounterBore
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCounterSinkAngle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCounterSinkDiameter
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCurve
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCylinder
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCylindricity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDatum
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDepth
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDiameter
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDistanceBetween
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtEdgePoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtEllipse
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtExtremePoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtExtrude
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtFillet
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtFlatness
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtLength
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtMidLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtMidPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtMidPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtNotch
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOffsetLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOffsetPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOffsetPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOpenSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtParallelism
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtParallelLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtParallelPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPattern
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPerpendicularity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPerpendicularLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPerpendicularPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPiercePoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPosition
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectArc
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectClosedSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectEllipse
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtRadius
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtSphere

Use regedit.exe to delete the following additional registry values from the Windows Registry:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|api|redist|SolidWorks.Interop.cosworks.dll\SolidWorks.Interop.cosworks,Version="19.5.0.91",Culture="neutral",FileVersion="19.5.0.91",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.IRemoteInteropObjectContract.dll\SolidWorks.IRemoteInteropObjectContract,Version="19.5.0.91",PublicKeyToken="0A5661036478897F",Culture="neutral",FileVersion="19.5.0.91",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.MacroBuilder.dll\SolidWorks.MacroBuilder,Version="19.5.0.91",PublicKeyToken="C81A2871E41DFD0E",Culture="neutral",FileVersion="19.5.0.91",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.Proxy.Sldworks.dll\SolidWorks.Proxy.Sldworks,Version="19.5.0.91",PublicKeyToken="36EBD3389CA6E48F",Culture="neutral",FileVersion="19.5.0.91",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Features\773311F41AB02554A9BBB92F02AF1F23\SolidWorks
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\11251354067025549B95BF284EC5A5DD\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\47D095F557AAF0147A87C3FDEC21CD4D\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\773311F41AB02554A9BBB92F02AF1F23\ProductName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-578277939-2904081775-1286370348-1001\\Device\HarddiskVolume3\Program Files (x86)\Common Files\SolidWorks Installation Manager\BackgroundDownloading\sldBgDwld.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-578277939-2904081775-1286370348-1001\\Device\HarddiskVolume3\Program Files\SolidWorks Corp\SolidWorks\setup\i386\swactwiz.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-578277939-2904081775-1286370348-1001\\Device\HarddiskVolume3\Program Files\SolidWorks Corp\SolidWorks\SLDWORKS.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-578277939-2904081775-1286370348-1001\\Device\HarddiskVolume3\Users\UserName\Desktop\Solidwork 2011 (include accessories)\Solid Works 2011\SolidWorks 2011 x64 SP5\sldim\sldIM.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CoordinatorServiceHost\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\Description
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\DisplayName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\ImagePath

How to uninstall SolidWorks 2011 x64 Edition SP05 from your computer with the help of Advanced Uninstaller PRO

SolidWorks 2011 x64 Edition SP05 is an application released by the software company SolidWorks Corporation. Sometimes, people decide to erase it. Sometimes this is easier said than done because performing this manually requires some know-how regarding Windows internal functioning. One of the best QUICK action to erase SolidWorks 2011 x64 Edition SP05 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, add it. This is good because Advanced Uninstaller PRO is the best uninstaller and all around utility to clean your system.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire the program's design and wealth of tools available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools button


4. Activate the Uninstall Programs feature


5. All the programs installed on your computer will be made available to you

6. Scroll the list of programs until you find SolidWorks 2011 x64 Edition SP05 or simply click the Search feature and type in "SolidWorks 2011 x64 Edition SP05". If it exists on your system the SolidWorks 2011 x64 Edition SP05 program will be found very quickly. Notice that after you click SolidWorks 2011 x64 Edition SP05 in the list of applications, some information regarding the program is shown to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other people have regarding SolidWorks 2011 x64 Edition SP05, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Technical information regarding the program you want to remove, by clicking on the Properties button.

For instance you can see that for SolidWorks 2011 x64 Edition SP05:

• The publisher is: http://www.solidworks.com
• The uninstall string is: C:\Windows\SolidWorks\IM_20110-40500-1100-100\sldim\sldIM.exe

7. Press the Uninstall button. A confirmation window will come up. accept the uninstall by clicking Uninstall. Advanced Uninstaller PRO will automatically remove SolidWorks 2011 x64 Edition SP05.


8. After uninstalling SolidWorks 2011 x64 Edition SP05, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to perform the cleanup. All the items that belong SolidWorks 2011 x64 Edition SP05 that have been left behind will be found and you will be able to delete them. By removing SolidWorks 2011 x64 Edition SP05 using Advanced Uninstaller PRO, you can be sure that no registry items, files or directories are left behind on your computer.

Your computer will remain clean, speedy and able to run without errors or problems.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall SolidWorks 2011 x64 Edition SP05 by SolidWorks Corporation from your PC, nor are we saying that SolidWorks 2011 x64 Edition SP05 by SolidWorks Corporation is not a good application for your computer. This text only contains detailed info on how to uninstall SolidWorks 2011 x64 Edition SP05 in case you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.