SolidWorks 2013 x64 Edition SP04

A way to uninstall SolidWorks 2013 x64 Edition SP04 from your computer

SolidWorks 2013 x64 Edition SP04 is a Windows program. Read more about how to remove it from your PC. The Windows version was created by SolidWorks Corporation. You can read more on SolidWorks Corporation or check for application updates here. Detailed information about SolidWorks 2013 x64 Edition SP04 can be seen at http://www.solidworks.com. The application is often installed in the C:\Program Files\SolidWorks Corp directory (same installation drive as Windows). You can uninstall SolidWorks 2013 x64 Edition SP04 by clicking on the Start menu of Windows and pasting the command line C:\Windows\SolidWorks\IM_20130-40400-1100-100\sldim\sldIM.exe. Note that you might be prompted for admin rights. swspmanager.exe is the programs's main file and it takes approximately 152.04 KB (155688 bytes) on disk.

The following executables are installed beside SolidWorks 2013 x64 Edition SP04. They occupy about 186.75 MB (195822168 bytes) on disk.

• DsgnChkRptView.exe (209.04 KB)
• gabiswengine.exe (2.28 MB)
• LocalSldService.exe (15.54 KB)
• propertyManagerUpload.exe (243.54 KB)
• RTLibraryManager.exe (5.05 MB)
• setcatenv.exe (38.10 KB)
• sldbgproc.exe (45.04 KB)
• sldCostingTemplateEditorAppU.exe (327.04 KB)
• sldexitapp.exe (711.04 KB)
• sldphotoshopcon.exe (78.54 KB)
• sldProcMon.exe (112.54 KB)
• sldShellExtServer.exe (60.04 KB)
• sldu3d.exe (9.93 MB)
• SLDWORKS.exe (2.24 MB)
• sldworks_fs.exe (306.54 KB)
• swShellFileLauncher.exe (355.04 KB)
• swspmanager.exe (152.04 KB)
• UtlReportViewer.exe (155.54 KB)
• pidcollector.exe (24.00 KB)
• innovahxreg.exe (61.54 KB)
• circuitworks.exe (703.00 KB)
• driveworksxpressdt.exe (16.50 KB)
• Dsgnchkbldu.exe (2.16 MB)
• DsgnChkDesignBinderu.exe (196.00 KB)
• efdsolver.exe (506.13 KB)
• photoview360.exe (579.77 KB)
• photoview360_cl.exe (564.77 KB)
• copyoptwiz.exe (3.56 MB)
• lmutil.exe (1.54 MB)
• MigrateDesignLib.exe (61.77 KB)
• swactwiz.exe (8.73 MB)
• swactwizhelpersc.exe (3.76 MB)
• swactwiz_s.exe (8.73 MB)
• swinstactsvc.exe (834.04 KB)
• swlicservinst.exe (280.04 KB)
• swlmutil.exe (2.99 MB)
• swlmwiz.exe (8.28 MB)
• swinstactsvc.exe (692.04 KB)
• swlicservinst.exe (280.04 KB)
• ans2cos.exe (1.13 MB)
• check.exe (196.29 KB)
• cos2abq.exe (1.06 MB)
• cos2ans.exe (825.07 KB)
• cos2nas.exe (1.18 MB)
• cos2pat.exe (791.57 KB)
• cos2xds.exe (733.57 KB)
• cwanalysisproc.exe (57.54 KB)
• cwmeshproc.exe (29.04 KB)
• dpost.exe (636.10 KB)
• dstar.exe (1.66 MB)
• fat.exe (1.06 MB)
• ghs3d.exe (2.73 MB)
• ghs3dv3.exe (2.42 MB)
• hstar.exe (1.65 MB)
• ids2cos.exe (1.16 MB)
• nas2cos.exe (1.19 MB)
• nstar.exe (3.43 MB)
• ParametricObject.exe (181.04 KB)
• pat2cos.exe (970.57 KB)
• postans.exe (103.54 KB)
• pre1.exe (35.54 KB)
• renum.exe (35.54 KB)
• star.exe (8.32 MB)
• stopt.exe (555.54 KB)
• stres.exe (636.10 KB)
• swactwiz.exe (6.66 MB)
• cosmossupporttool.exe (249.29 KB)
• material.exe (345.27 KB)
• simulation cleaning utility.exe (363.07 KB)
• sld3dViaUploader.exe (124.00 KB)
• sldBenchmark.exe (194.50 KB)
• PropertyTabBuilder.exe (860.00 KB)
• sldrx.exe (1.77 MB)
• sldrxmm.exe (108.04 KB)
• GtReportManager.exe (203.00 KB)
• DTSCoordinatorService.exe (75.54 KB)
• DTSMonitor.exe (580.04 KB)
• DTSServiceManager.exe (15.54 KB)
• swBOEngine.exe (1.32 MB)
• swScheduler.exe (2.46 MB)
• drawcompare.exe (237.29 KB)
• swvbaserver.exe (378.00 KB)
• sldsetdocprop.exe (5.50 MB)
• UpdateBrowserData.exe (365.54 KB)
• SldToolboxConfigure.exe (7.83 MB)
• sldtoolboxupdater.exe (280.50 KB)
• eDrawingOfficeAutomator.exe (2.98 MB)
• EModelViewer.exe (387.00 KB)
• ghs3dV4.0.exe (2.50 MB)
• ghs3dV4.2.exe (3.89 MB)
• meshadaptV3.2.exe (2.64 MB)
• yamsV3.0_winnt.exe (766.63 KB)
• BatchManager.exe (258.63 KB)
• BatchSW.exe (250.13 KB)
• checkverinfo_swp.exe (122.13 KB)
• DBConverter.exe (159.63 KB)
• Html2Word.exe (23.63 KB)
• PowerPointReport.exe (38.62 KB)
• SimpoeEmptyExe.exe (28.63 KB)
• SimpoeServiceSW.exe (87.63 KB)
• cool.exe (441.13 KB)
• packw.exe (2.55 MB)
• pipe.exe (308.63 KB)
• warp.exe (3.10 MB)
• warps3d.exe (2.58 MB)
• bthickcal.exe (37.63 KB)
• cgltks.exe (19.13 KB)
• runnerbalance.exe (32.13 KB)
• weldx64.exe (6.27 MB)
• cool.exe (415.13 KB)
• packw.exe (2.54 MB)
• pipe.exe (308.63 KB)
• warp.exe (3.09 MB)
• cool.exe (3.10 MB)
• packw.exe (6.05 MB)
• pipe.exe (308.63 KB)
• warp.exe (3.10 MB)

...click to view all...

The information on this page is only about version 21.4.0.70 of SolidWorks 2013 x64 Edition SP04. Following the uninstall process, the application leaves leftovers on the PC. Some of these are shown below.

You should delete the folders below after you uninstall SolidWorks 2013 x64 Edition SP04:

• C:\Program Files\SolidWorks Corp
• C:\Users\%user%\AppData\Local\Microsoft\VSTAHost\SolidWorks_VSTA
• C:\Users\%user%\AppData\Local\SolidWorks
• C:\Users\%user%\AppData\Local\Temp\SOLIDWORKS

The files below were left behind on your disk when you remove SolidWorks 2013 x64 Edition SP04:

• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\cmexprnode.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\bmpio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\celshader.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_display.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_geometric.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_noise.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_organic.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_panels.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_process.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_skins.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_space.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_tiles.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_water.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\emodo_waveforms.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\exrio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\fmt3dm.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\gifio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\gplane.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\hairshader.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\hdrio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\histogrammonitor.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\iesimage.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\ik.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\itemdraw.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\jp2io.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\jpgio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\mpath.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pngio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\python.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_bsddb.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_ctypes.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_ctypes_test.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_elementtree.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_hashlib.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_msi.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_multiprocessing.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_socket.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_ssl.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\_testcapi.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\bz2.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\py.ico
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\pyc.ico
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\pyexpat.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\select.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\unicodedata.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\dll\winsound.pyd
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\pythonmodules\standardmodules.zip
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\rgbio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\shdceledges.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\shdhalftone.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\skinshader.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\tifio.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\extra\vectorscopemonitor.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\frame6.dll
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\front6.dll
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\chinese\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\chinese\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\chinese-simplified\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\chinese-simplified\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\czech\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\czech\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\english\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\english\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\french\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\french\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\german\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\german\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\italian\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\italian\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\japanese\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\japanese\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\korean\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\korean\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\polish\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\polish\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\portuguese-brazilian\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\portuguese-brazilian\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\russian\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\russian\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\spanish\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\spanish\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\turkish\460msg.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\lang\turkish\netrenderclient.chm
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\locus6.dll
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\modus6.dll
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\nexus6.dll
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\particle.lx
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\pvnetrenderclient.exe
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\python26.dll
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\mainmenu.nib\designable.nib
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\mainmenu.nib\keyedobjects.nib
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\netrenderclient.icns
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_601defaultlayout.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_about.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_about.tga
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_cmdhelp.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_cmdicons.cfg
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_cmdicons_lge.tga
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_cmdicons_med.tga
• C:\Program Files\SolidWorks Corp\Photoview 360 Network Render Client\resrc\nrc_commsg.cfg

Frequently the following registry data will not be uninstalled:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|Common Files|SolidWorks Shared|DwgDocumentMgrNET4.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|Common Files|SolidWorks Shared|SolidWorks.Interop.swdocumentmgr.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|SolidWorks Corp|SolidWorks eDrawings|eDrawingsGraphicsCardClient.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Common Files|SolidWorks Shared|DwgDocumentMgrNET4.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|api|redist|SolidWorks.Interop.cosworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|dznet.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SldForum.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|sldPropertyTabBuilder|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|sldxps.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SolidWorks.IRemoteInteropObjectContract.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SolidWorks.MacroBuilder.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SolidWorks.Proxy.Sldworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks eDrawings X64 Edition|eDrawingsGraphicsCardClient.dll
• HKEY_CLASSES_ROOT\SolidWorks Installation Manager
• HKEY_CLASSES_ROOT\SolidWorks.EvaluateGraphicsClient.13
• HKEY_CLASSES_ROOT\SolidWorks.EvaluateGraphicsClient.EDrawingsGraphicsCardClientTest
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.CadRef
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAngleBetween
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAngularity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAppliedDatum
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtAppliedFeature
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtArc
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitArc
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitClosedSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitCone
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitCylinder
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitEllipse
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitSphere
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBestfitTorus
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtBlockTolerances
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCentroidCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCentroidPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtChamfer
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCircularity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCircularRunout
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtClosedSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositeDistanceBetween
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositeLineProfile
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositePosition
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompositeSurfaceProfile
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundClosedSlot3D
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundHole
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundNotch
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCompoundWidth
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtConcentricity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCone
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCornerPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCorTol
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCounterBore
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCounterSinkAngle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCounterSinkDiameter
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCurve
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCylinder
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtCylindricity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDatum
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDepth
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDiameter
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtDistanceBetween
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtEdgePoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtEllipse
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtExtremePoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtExtrude
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtFillet
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtFlatness
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtIntersectPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtLength
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtMidLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtMidPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtMidPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtNotch
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOffsetLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOffsetPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOffsetPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtOpenSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtParallelism
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtParallelLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtParallelPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPattern
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPerpendicularity
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPerpendicularLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPerpendicularPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPiercePoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPlane
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPoint
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtPosition
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectArc
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectCircle
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectClosedSlot
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectEllipse
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectLine
• HKEY_CLASSES_ROOT\SolidWorks.GdtAnalysis.GdtProjectPoint

Use regedit.exe to remove the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|Common Files|SolidWorks Shared|SolidWorks.Interop.swdocumentmgr.dll\SolidWorks.Interop.swdocumentmgr,Version="21.4.0.70",Culture="neutral",FileVersion="21.4.0.70",ProcessorArchitecture="MSIL",PublicKeyToken="E52DFA2D3A1E978A"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|api|redist|SolidWorks.Interop.cosworks.dll\SolidWorks.Interop.cosworks,Version="21.4.0.70",Culture="neutral",FileVersion="21.4.0.70",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SolidWorks.IRemoteInteropObjectContract.dll\SolidWorks.IRemoteInteropObjectContract,Version="21.4.0.70",Culture="neutral",FileVersion="21.4.0.70",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SolidWorks.MacroBuilder.dll\SolidWorks.MacroBuilder,Version="21.4.0.70",Culture="neutral",FileVersion="21.4.0.70",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks (2)|SolidWorks.Proxy.Sldworks.dll\SolidWorks.Proxy.Sldworks,Version="21.4.0.70",Culture="neutral",FileVersion="21.4.0.70",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Features\E7AE5B6BF19BD3449A850B60F25B8340\SolidWorks
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\3B8226A2D5BB9D74B96B0259A3506089\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\D6BC6862FA910A94BA2D921D437D2CF3\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\E02BE86190CFE2D4389A9484730103C4\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\E7AE5B6BF19BD3449A850B60F25B8340\ProductName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CoordinatorServiceHost\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteSolverDispatcher\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\Description
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\DisplayName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\ImagePath

A way to delete SolidWorks 2013 x64 Edition SP04 from your PC with Advanced Uninstaller PRO

SolidWorks 2013 x64 Edition SP04 is an application offered by SolidWorks Corporation. Frequently, people try to erase this application. This is efortful because deleting this manually requires some advanced knowledge related to Windows internal functioning. One of the best SIMPLE way to erase SolidWorks 2013 x64 Edition SP04 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, add it. This is good because Advanced Uninstaller PRO is a very potent uninstaller and all around utility to clean your PC.

DOWNLOAD NOW

• go to Download Link
• download the setup by clicking on the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take your time to admire the program's interface and wealth of functions available. Advanced Uninstaller PRO is a powerful package of utilities.

3. Press the General Tools button


4. Activate the Uninstall Programs tool


5. All the applications existing on the PC will be made available to you

6. Navigate the list of applications until you find SolidWorks 2013 x64 Edition SP04 or simply activate the Search feature and type in "SolidWorks 2013 x64 Edition SP04". If it is installed on your PC the SolidWorks 2013 x64 Edition SP04 app will be found very quickly. After you click SolidWorks 2013 x64 Edition SP04 in the list of applications, some information regarding the application is made available to you:

• Safety rating (in the left lower corner). This explains the opinion other users have regarding SolidWorks 2013 x64 Edition SP04, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information regarding the app you wish to uninstall, by clicking on the Properties button.

For example you can see that for SolidWorks 2013 x64 Edition SP04:

• The software company is: http://www.solidworks.com
• The uninstall string is: C:\Windows\SolidWorks\IM_20130-40400-1100-100\sldim\sldIM.exe

7. Press the Uninstall button. A confirmation page will appear. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will then uninstall SolidWorks 2013 x64 Edition SP04.


8. After removing SolidWorks 2013 x64 Edition SP04, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to perform the cleanup. All the items of SolidWorks 2013 x64 Edition SP04 which have been left behind will be detected and you will be able to delete them. By uninstalling SolidWorks 2013 x64 Edition SP04 using Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or directories are left behind on your system.

Your Windows PC will remain clean, speedy and able to serve you properly.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall SolidWorks 2013 x64 Edition SP04 by SolidWorks Corporation from your PC, we are not saying that SolidWorks 2013 x64 Edition SP04 by SolidWorks Corporation is not a good application for your PC. This page only contains detailed instructions on how to uninstall SolidWorks 2013 x64 Edition SP04 supposing you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.