Tekla Structures 20.0 Extension: RFIManager

A way to uninstall Tekla Structures 20.0 Extension: RFIManager from your computer

Tekla Structures 20.0 Extension: RFIManager is a Windows application. Read below about how to uninstall it from your computer. It is made by Tekla Corporation. Take a look here where you can read more on Tekla Corporation. You can see more info on Tekla Structures 20.0 Extension: RFIManager at http://www.Tekla.com. The application is often installed in the C:\Program Files\Tekla Structures\20.0 folder (same installation drive as Windows). The full command line for removing Tekla Structures 20.0 Extension: RFIManager is MsiExec.exe /X{06768836-9AC6-4220-A9C8-B79C65C9173B}. Keep in mind that if you will type this command in Start / Run Note you might be prompted for administrator rights. RFIManager.exe is the Tekla Structures 20.0 Extension: RFIManager's primary executable file and it occupies approximately 448.57 KB (459336 bytes) on disk.

Tekla Structures 20.0 Extension: RFIManager contains of the executables below. They occupy 100.37 MB (105245392 bytes) on disk.

• albion.exe (1.72 MB)
• ayrshire.exe (1.64 MB)
• cold_rolled.exe (2.18 MB)
• concrete1.exe (2.61 MB)
• concrete2.exe (2.58 MB)
• concrete3.exe (2.28 MB)
• elematic.exe (1.04 MB)
• export.exe (1.12 MB)
• hispan.exe (1.61 MB)
• kingspan.exe (1.72 MB)
• metl-con.exe (1.75 MB)
• metsec.exe (1.76 MB)
• reid.exe (1.71 MB)
• Steel1.exe (10.35 MB)
• steel2.exe (1.59 MB)
• steel3.exe (2.84 MB)
• steel4.exe (2.29 MB)
• steel5.exe (1.95 MB)
• steel6.exe (1.13 MB)
• steelSections.exe (1.61 MB)
• tower.exe (1.08 MB)
• ultrazed.exe (1.85 MB)
• unitechnik.exe (1.72 MB)
• HelpViewer.exe (367.80 KB)
• msxsl.exe (24.31 KB)
• ReferenceModelImportConfiguration.exe (42.30 KB)
• Run.exe (42.80 KB)
• symed.exe (19.83 MB)
• Tekla.Warehouse.WindowsService.exe (14.80 KB)
• TeklaStructures.exe (10.45 MB)
• xs_cancel.exe (23.30 KB)
• Floatie.exe (517.30 KB)
• AddSurfaceSymbols.exe (90.80 KB)
• CutLines.exe (91.30 KB)
• DefineMasterDrawing.exe (30.30 KB)
• DrawingAttributesConverter.exe (1.16 MB)
• DrawingSymbolManager.exe (304.59 KB)
• Drawingtools.exe (80.30 KB)
• ExtensionGallery.exe (106.00 KB)
• MasterDrawingCatalog.exe (31.80 KB)
• MomentConnectionSymbol.exe (93.80 KB)
• NeighborGridsAndCompassMarks.exe (120.50 KB)
• NodeAlignment.exe (117.30 KB)
• RebarLayeringMarker.exe (289.30 KB)
• RebarMeshViewCreator.exe (103.80 KB)
• SideSymbolsNumerical.exe (43.30 KB)
• SketchReports.exe (125.80 KB)
• TSDrawingTools.exe (87.30 KB)
• WeldMarkMerge.exe (58.50 KB)
• WeldPathDrawing.exe (104.50 KB)
• DefaultFont.exe (127.50 KB)
• MultiPurposeDimensioning.exe (156.30 KB)
• MigrationWizard.exe (257.80 KB)
• AnchorRodTools.exe (90.08 KB)
• AttachPartWizard.exe (56.50 KB)
• AutomaticSplicingTool.exe (295.30 KB)
• BasePlateApplicator.exe (123.59 KB)
• BraceDrawing.exe (83.50 KB)
• ClashCheckManager.exe (337.80 KB)
• ComponentVariableImporter.exe (169.60 KB)
• ContinuousBeamReinforcement.exe (3.64 MB)
• CopyGADrawing.exe (58.30 KB)
• CustomComponentDialogEditor.exe (349.80 KB)
• CustomInquiry.exe (200.80 KB)
• DetailManager.exe (3.47 MB)
• ErectionSequencer.exe (112.59 KB)
• ExportSketchUp.exe (105.80 KB)
• FabricationProcessOrganizer.exe (88.00 KB)
• GridLayoutTool.exe (117.58 KB)
• HMSExport.exe (150.30 KB)
• ImportFromTeklaBIMsight.exe (126.80 KB)
• LayoutManager.exe (1.19 MB)
• MeshCuttingList.exe (125.50 KB)
• ModelDimensions.exe (71.58 KB)
• NumberingSettingsByPhase.exe (93.30 KB)
• OffsetCheck.exe (68.50 KB)
• OffsetGeneration.exe (135.00 KB)
• OffsetGenerationManager.exe (242.50 KB)
• PDFReferenceModel.exe (81.80 KB)
• pdfwriter.exe (144.00 KB)
• PhaseNumbering.exe (61.08 KB)
• PropertySetDefinitions.exe (198.80 KB)
• PublishTo3DPDF.exe (79.50 KB)
• Publish_to_Tekla_BIMsight.exe (131.80 KB)
• RebarClassificator.exe (71.30 KB)
• RebarShapeManager.exe (177.80 KB)
• ReferenceModelScale.exe (55.59 KB)
• RFIManager.exe (448.57 KB)
• SaveAsModelTemplate.exe (82.80 KB)
• Steps.exe (39.30 KB)
• Tube.NC.Export.exe (127.30 KB)
• u3dexport.exe (352.50 KB)
• WeldPreparation.exe (104.58 KB)
• WorkPlaneManager.exe (74.00 KB)
• CommentTool.exe (314.34 KB)
• DesignGroupNumbering.exe (126.30 KB)
• ModelCheckerSuite.exe (192.00 KB)
• FontSetup.exe (26.30 KB)
• ObjectBrowser.exe (20.80 KB)
• CopyWeldProperties.exe (18.50 KB)
• EditPrimaryProperties.exe (129.00 KB)
• EditSecondaryProperties.exe (41.00 KB)
• EditVertexes.exe (17.00 KB)
• ExtendWeld.exe (15.50 KB)
• GroupWelds.exe (19.00 KB)
• JoinWelds.exe (20.50 KB)
• Modeling.exe (197.50 KB)
• SplitWeld.exe (20.00 KB)
• SwitchMainToSecondary.exe (15.00 KB)
• UngroupWelds.exe (14.50 KB)
• WeldingTools.exe (29.00 KB)
• DirectoryBrowser.exe (118.80 KB)
• SupportTool.exe (153.80 KB)
• Sandbox.exe (26.30 KB)
• cachegen.exe (139.80 KB)
• clashcheckldr.exe (43.30 KB)
• clashcheckworker_loader.exe (15.30 KB)
• ifcpluginworker_loader.exe (14.30 KB)
• importloader-150.exe (17.80 KB)
• importloader.exe (15.30 KB)

...click to view all...

This page is about Tekla Structures 20.0 Extension: RFIManager version 20.0.2 alone. Some files and registry entries are regularly left behind when you remove Tekla Structures 20.0 Extension: RFIManager.

Folders found on disk after you uninstall Tekla Structures 20.0 Extension: RFIManager from your computer:

• C:\TeklaStructures\20.0

The files below were left behind on your disk by Tekla Structures 20.0 Extension: RFIManager's application uninstaller when you removed it:

• C:\TeklaStructures\20.0\Environments\australasia\macros\modeling\PublishTo3D-PDF.bmp
• C:\TeklaStructures\20.0\Environments\australasia\macros\modeling\PublishTo3D-PDF.cs
• C:\TeklaStructures\20.0\Environments\australasia\macros\modeling\PublishTo3D-PDF_big.bmp
• C:\TeklaStructures\20.0\Environments\austria\macros\modeling\PublishTo3D-PDF.bmp
• C:\TeklaStructures\20.0\Environments\austria\macros\modeling\PublishTo3D-PDF.cs
• C:\TeklaStructures\20.0\Environments\austria\macros\modeling\PublishTo3D-PDF_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\drawings\DrawingSymbolManager.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\drawings\DrawingSymbolManager.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\drawings\NeighborGridsAndCompassMarks.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\drawings\NeighborGridsAndCompassMarks.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\drawings\NeighborGridsAndCompassMarks_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_00.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_00.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_00.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_03.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_03.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_03.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_06.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_06.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_06.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_14.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_14.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_14.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_16.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_16.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_16.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_18.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_18.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_18.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_21.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_21.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_21.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_24.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_24.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_24.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_26.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_26.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\macro_26.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\BasePlateApplicator.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\BasePlateApplicator.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\BasePlateApplicator_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\BraceDrawing.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\BraceDrawing.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ComponentVariableImporter.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ComponentVariableImporter.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ComponentVariableImporter_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\DefaultFont.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\DefaultFont.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\DefaultFont_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\DetailManager.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\DetailManager.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ErectionSequencer.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ErectionSequencer.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ErectionSequencer_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ExtensionGallery.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ExtensionGallery.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\FabricationProcessOrganizer.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\FabricationProcessOrganizer.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\FabricationProcessOrganizer_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\GridLayoutTool.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\GridLayoutTool.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\GridLayoutTool.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\GridLayoutTool.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\GridLayoutTool_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\MeshCuttingList.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\MeshCuttingList.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ModelDimensions.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ModelDimensions.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ModelDimensions_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\PhaseNumbering.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\PhaseNumbering.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\PhaseNumbering_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\PublishTo3D-PDF.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\PublishTo3D-PDF.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\PublishTo3D-PDF_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ReferenceModelScale.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ReferenceModelScale.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\ReferenceModelScale_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\RFIManager.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\RFIManager.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\RFIManager.dll
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\RFIManager.pdb
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\RFIManager_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\WeldPreparation.bmp
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\WeldPreparation.cs
• C:\TeklaStructures\20.0\Environments\Common\macros\modeling\WeldPreparation_big.bmp
• C:\TeklaStructures\20.0\Environments\Common\system\Color_by_Fabrication_Process.rep
• C:\TeklaStructures\20.0\Environments\Common\system\Crane.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\E_AssemblyAnimation.rep
• C:\TeklaStructures\20.0\Environments\Common\system\E_AssemblyDone.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\E_AssemblyErectionPlanned.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\E_AssemblyPlanned.rep
• C:\TeklaStructures\20.0\Environments\Common\system\ErectionClearance.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Bevels.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Bevels_Copes.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Bevels_Copes_Holes.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Bevels_Welds.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Copes.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Copes_Bevels.PObjGrp
• C:\TeklaStructures\20.0\Environments\Common\system\Fab_Process_Copes_Bevels_Welds.PObjGrp

Registry that is not uninstalled:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|Tekla|Drawings|NeighborGridsAndCompassMarks.exe
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|Akit5.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|PublishTo3DPDF.exe
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|Tekla.Common.Geometry.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|Tekla.Common.Geometry.Primitives.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|Tekla.Structures.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|Tekla.Structures.Model.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Model|Tekla.Technology.Scripting.dll
• HKEY_CURRENT_USER\Software\Microsoft\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Drawings|DefaultFont|DefaultFont.exe
• HKEY_CURRENT_USER\Software\Microsoft\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Drawings|DefaultFont|Tekla.Common.Geometry.dll
• HKEY_CURRENT_USER\Software\Microsoft\Installer\Assemblies\C:|TeklaStructures|20.0|nt|bin|applications|tekla|Drawings|DefaultFont|Tekla.Common.Geometry.Primitives.dll
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\638867606CA902249A8C7BC9569C71B3
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{06768836-9AC6-4220-A9C8-B79C65C9173B}

Additional values that you should delete:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\638867606CA902249A8C7BC9569C71B3\ProductName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\TeklaStructures\20.0\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{06768836-9AC6-4220-A9C8-B79C65C9173B}\

A way to erase Tekla Structures 20.0 Extension: RFIManager with the help of Advanced Uninstaller PRO

Tekla Structures 20.0 Extension: RFIManager is an application marketed by Tekla Corporation. Frequently, computer users want to remove it. This can be efortful because doing this by hand requires some experience regarding Windows internal functioning. The best EASY solution to remove Tekla Structures 20.0 Extension: RFIManager is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to clean your Windows computer.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to admire the program's design and wealth of functions available. Advanced Uninstaller PRO is a powerful Windows optimizer.

3. Press the General Tools button


4. Press the Uninstall Programs button


5. All the applications installed on your PC will appear

6. Scroll the list of applications until you find Tekla Structures 20.0 Extension: RFIManager or simply click the Search field and type in "Tekla Structures 20.0 Extension: RFIManager". If it is installed on your PC the Tekla Structures 20.0 Extension: RFIManager program will be found automatically. Notice that when you click Tekla Structures 20.0 Extension: RFIManager in the list of apps, the following data about the application is shown to you:

• Star rating (in the left lower corner). This explains the opinion other people have about Tekla Structures 20.0 Extension: RFIManager, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Details about the app you wish to uninstall, by clicking on the Properties button.

For example you can see that for Tekla Structures 20.0 Extension: RFIManager:

• The software company is: http://www.Tekla.com
• The uninstall string is: MsiExec.exe /X{06768836-9AC6-4220-A9C8-B79C65C9173B}

7. Press the Uninstall button. A confirmation window will appear. accept the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will automatically remove Tekla Structures 20.0 Extension: RFIManager.


8. After uninstalling Tekla Structures 20.0 Extension: RFIManager, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to start the cleanup. All the items of Tekla Structures 20.0 Extension: RFIManager which have been left behind will be found and you will be asked if you want to delete them. By removing Tekla Structures 20.0 Extension: RFIManager using Advanced Uninstaller PRO, you are assured that no Windows registry items, files or folders are left behind on your PC.

Your Windows system will remain clean, speedy and able to take on new tasks.

Geographical user distribution

Disclaimer

This page is not a recommendation to remove Tekla Structures 20.0 Extension: RFIManager by Tekla Corporation from your PC, nor are we saying that Tekla Structures 20.0 Extension: RFIManager by Tekla Corporation is not a good application for your computer. This page only contains detailed info on how to remove Tekla Structures 20.0 Extension: RFIManager in case you decide this is what you want to do. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.